Hifiverse

Regallautsprecher - Genelec 8320A

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 8320A
Bildquelle - (c) Genelec

The 8320A is a two-way Smart Active Monitor (SAM) from Genelec and the company's entry point into its SAM range of studio monitors. It was introduced in 2014 together with the larger 8330A. Finishes are dark grey, white, black and RAW unpainted aluminium.

Key specs that matter

Drive units are a 105 mm cone bass driver and a 19 mm metal dome tweeter, each with its own 50 W Class D amplifier (short-term output, THD below 0.05%). Crossover frequency is 2.9 kHz. Frequency response is 55 Hz - 23 kHz (-6 dB), with an accuracy of ±1.5 dB from 66 Hz to 20 kHz. Maximum SPL is ≥100 dB short-term (sine, on axis in half space, averaged 100 Hz - 3 kHz), ≥94 dB long-term with IEC weighted noise and ≥107 dB peak per pair at 1 m. Harmonic distortion at 85 dB SPL is below 3% from 50 to 200 Hz and below 0.5% above 200 Hz. Self-generated noise is ≤5 dB SPL (A-weighted). Its only audio input is an analog XLR, balanced at 10 kOhm, with -6 dBu for 100 dB SPL at 1 m and a maximum of +24 dBu. Two RJ45 connectors are provided for the GLM network. Consumption is below 0.5 W in ISS, 3 W idle and 50 W at full output, from 100-240 V AC. Height is 230 mm, or 242 mm with the Iso-Pod, width 151 mm, depth 142 mm, and weight 3.2 kg.

Engineering and use context

Inside each SAM monitor is a DSP stage, and the drivers are directly connected to dedicated Class D power amplifiers. Driver protection is implemented as part of the SAM signal processing. Genelec quotes a group delay of 2.8 ms at high frequencies with Extended Phase Linearity switched off. The Minimum Diffraction Enclosure (MDE) is die-cast from recycled aluminium and shaped to reduce edge diffraction, and it is combined with a Directivity Control Waveguide (DCW). Bass loading is reflex, through a long curved tube that ends in a wide flare on the rear.

Setup runs in GLM 2.0 or later, with up to 30 monitors and subwoofers daisy-chained to the GLM Adapter, and the settings can be saved into each monitor. ISS standby is disabled by factory default and is enabled, with its delay time, in GLM. A reset button held for 10 seconds restores factory settings. For mounting, the Iso-Pod tilts the monitor, the base has a threaded hole for a standard microphone stand, and two M6 x 10 mm inserts on the rear take wall or ceiling brackets. A 1.8 m mains cable and a 5 m RJ45 cable are in the box, and warranty is two years plus three on registration.

Pairing

A source with a balanced line-level XLR output is required. Calibration needs the free GLM software and the GLM Calibration Kit, sold separately. Genelec lists the 7350A SAM subwoofer as a related product.

Alternatives

The Genelec 8330A is the next SAM two-way model up, with a 130 mm bass driver, an AES/EBU input with thru and a 45 Hz lower limit at -6 dB.

Spezifikationen

  • Modellbezeichnung

    8320A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    55

  • Obere Grenzfrequenz +/- 3dB (Hz)

    23 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    50 + 50

  • Größe (sm)

    24.2 x 15.1 x 14.2

  • Gewicht (kg)

    3.2

  • Offizieller Link

Weitere Komponenten