Denon DCD-3000NE
Image source — © Denon
Model name
DCD-3000NE
Transport
Yes
Player
Yes
SACD support
Yes
Engine
N/A
Frequency response low +/- 3dB (for CD) (Hz)
2
Frequency response high +/- 3dB (for CD) (Hz)
20 000
Frequency response low +/- 3dB (for SACD) (Hz)
2
Frequency response high +/- 3dB (for SACD) (Hz)
50 000
Gain (dBu)
N/A
Output Level (balanced) (V)
N/A
Output Level (single-ended) (V)
2.2
Input Impedance (balanced) (Ω)
N/A
Input Impedance (single-ended) (Ω)
N/A
Output Impedance (balanced) (Ω)
N/A
Output Impedance (single-ended) (Ω)
N/A
Dynamic range (for CD) (dB)
101
Dynamic range (for SACD) (dB)
115
Signal to Noise Ratio (for CD) (dB)
N/A
Signal to Noise Ratio (for SACD) (dB)
N/A
Total Harmonic Distortion + Noise (for CD) (%)
0.0015
Total Harmonic Distortion + Noise (for SACD) (%)
0.0005
Dimensions (mm)
434 × 138 × 405
Weight (kg)
16.8
Official link
The Denon DCD-600NE supports mp3 and WMA playback, and it also uses Denon's proprietary AL32 signal processing scheme. The player's power supply is securely disconnected from the case to prevent vibrations.
The player has a proprietary S.V.H drive, which is reliably protected from external vibrations, and a DAC with Advanced AL32 Processing Plus technology is responsible for the conversion, which, according to the manufacturer, is capable of recovering some of the information lost during digital recording.
The device is capable of delivering 2 × 85 watts of power with a resistance of 4 ohms (proprietary Advanced High Current technology helps). Announced support for Apple AirPlay 2, AAC, FLAC, WAV formats. The player works with resolutions of 24 bit / 192 kHz and DSD 2.8 / 5.6 MHz. There is a Bluetooth adapter.
The player uses four digital-to-analog converters on BurrBrown PCM1795 chips operating in parallel mode. The DCD-A110 does not use a traditional operational amplifier as an output filter. The player is equipped with a fully discrete filter stage with carefully selected and individually tuned components.