Marten Design Supreme Extreme
Image source — © Marten Design
Model name
Supreme Extreme
Frequency Response low +/- 3dB (Hz)
120 (main), 17 (bass towers)
Frequency Response high +/- 3dB (Hz)
60 000
Sensitivity (dB at 1 W/1m)
93
Impedance (Ohms)
6
Power amplifier requirements (W)
600
Has internal amplification
N/A
Internal amplification power (W)
N/A
Size (sm)
30 x 182.2 x 63.5 + 70 x 182.2 x 63.5
Weight (kg)
140 _ 270
Official link
The speakers used here repeat the top model: a 3-inch diamond treble/midrange driver, a 1-inch diamond tweeter, and a 7-inch beryllium midrange driver. The low-frequency range is assigned to two drivers with aluminum sandwich diffusers with a diameter of 10 inches.
The Marten Oscar Trio have a bass reflex port built into the floor, so the speakers can be installed even near the walls of the hall. An ultra-high-quality element base was used - silver-gold capacitors, top-class resistors, internal Jorma wiring. The cases are made of 25 mm laminate, the drivers are with ceramic diffusers.
Marten Parker Trio is a 2.5-way Parker series floorstanding loudspeaker with a maximum power of 300 watts, a sensitivity of 91 dB and a resistance of 6 ohms.
The Parker Quintet, which heads the line, has four dynamic heads for high and low frequencies and the ceramic tweeter mentioned above. To expand the low-frequency range, four 9-inch aluminum passive radiators are located on the rear wall of the case.
The standard-shaped case has a 2-cm tweeter with a diamond membrane, a 13-cm midrange with a ceramic membrane, and an 18-cm bass with aluminum sandwich diffusers with a honeycomb structure.