Power amplifiers stereo — TAD TAD-M2500TX

Name: TAD-M2500TX
Brand: TAD
Rating: 100 (1 reviews)

Description, images, technical data and specifications

TAD TAD-M2500TX
Image source — © TAD

The TAD-M2500 TX power amplifier uses a BTL (bridge Load) design that connects two separate amplifiers in a balanced configuration for the left and right channels in a gain circuit from the input to the output stages.

Specifications

Model name
TAD-M2500TX
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
N/A
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
N/A
Output power (4Ω) (W)
550
Gain (dBu)
29.5
Frequency response low +/- 3dB (Hz)
10
Frequency response high +/- 3dB (Hz)
50 000
Signal to Noise Ratio (dB)
112
Total Harmonic Distortion + Noise (0% global feedback) (%)
N/A
Total Harmonic Distortion + Noise (100% global feedback) (%)
<0.05
Max power consumption (W)
250
Damping factor
N/A
Dimensions (mm)
440 × 170 × 467
Weight (kg)
42
Official link
N/A

More components

Power amplifiers stereo
TAD TAD-M2500MK2
The amplifier operates in Class D, which has a positive effect on energy efficiency: at maximum load, its power consumption does not exceed 250 watts.
Power amplifiers stereo
TAD TAD-M1000TX
The TAD Labs TAD-M1000TX amplifier uses the BTL (Bridge Load) concept, which connects two separate amplifiers in a balanced configuration for the left and right channels in a gain circuit from the input to the output stages. TAD has also redesigned the ground point, which serves as a reference point for symmetry not only electrically, but also structurally.
Power amplifiers stereo
TAD TAD-M700S
The M700S uses the latest cast aluminum chassis, which is characterized by high performance in terms of internal vibration dissipation. Such a chassis is capable of suppressing vibrations that occur at spurious frequencies. All components of the amplifier are optimally positioned and are not affected by vibrations caused by the sound pressure of the speakers.
Power amplifiers stereo
TAD TAD-M700
The power of the TEN M700 is stated at 350 Watts per channel at a load of 8 ohms, the power supply is built around a huge transformer, it uses custom-made capacitors with a total capacity of 33,000 microfarads. The amplifier has a fully symmetrical design, with an input sensitivity of 1.5 V and an input impedance of 100 kOhm.