Website:https://pylon.pl/
Est. year: 2011
Each Jasper 25 mk II Active speaker is equipped with several high—quality 150-watt amplifier modules, one for each driver. They are integrated inside the case and do not take up extra space in the room. The amplifiers operate in a modern, highly efficient and energy-efficient Class D, which provides excellent sound quality and reduces the load on the electrical network.
The Pylon Jasper 23 model is based on dynamic radiators from the Danish company ScanSpeak. The two-way configuration includes two 15W/8531K00 midrange/woofer drivers from the Revelator series and a D2608/913000 high-frequency driver equipped with a 28 mm silk dome.
Jasper Monitor 18 is a two—way system. Low and medium frequencies were "shouldered" by the 18-cm 4531G01 "Revelator" driver. The tweeter has a D2608 aperture weighing 0.18 kg. The speaker power is 180 watts with a sensitivity of 88 dB. According to the developers, the new system is quite enough to fill a 30 m2 room with high-quality sound.
The PYLON AUDIO Amber MK II is a speaker model built with large-caliber woofers and compression drivers.
The Pylon Audio Jade 30 is a three-band design, which means that the speaker is equipped with special drivers for each part of the band, which ensures accurate sound reproduction. The key element is a 15-inch midwoofer with a classic paper membrane, specially designed by Pylon Audio engineers.
A well-thought-out combination of srivers, including well-matched sound pressure, made it possible to select a frequency of about 1200 Hz for joining the bands. And thanks to a resistance of 8 ohms and a sensitivity of 91 dB, the Jade 20 speakers are completely undemanding to the amplifier - they can easily be rocked by a low-power bulb, and with a powerful transistor they will demonstrate their signature sound style and fully unlock their potential.
These are elegant floorstanding loudspeakers that will easily fit into any interior, from classics to lofts.
Pylon Audio Diamond 30 is a floorstanding speakr. The well-known and widely appreciated 19mm silk dome Scan Speak was used in the 3-band configuration, while the midrange reproduces a specialized 15cm Norwegian Seas driver.
Due to the slight tilt of the structure, the desired visual effect was achieved, and this was combined with the optimization of the phase dependence that occurs between the speakers. In Diamond 28, the crossover circuit is installed by direct mounting, it uses only polypropylene capacitors. The placement of coils is specially optimized to minimize interference.
The Jasper 25 MKII is an updated version of the well–established older Jasper series model. It combines engineering excellence and first-class sound.
The advanced crossover network in the Diamond Monitor 18 MKII was built using only linear elements such as air coils and polypropylene capacitors, which contributes to improved sound clarity.
The Diamond sub is a compact and very stylish subwoofer that can output 500 watts.
The design features a new 18-centimeter PSM 18.8 CS midrange driver operating in a separate camera. The cellulose-coated membrane driver is designed with maximum sound uniformity and microdynamics in mind in the most sensitive range. The two PSW 18.8 CS 18 cm woofers provide the perfect base for the rest of the range, delivering a reliable dose of the lowest registers.
The symmetrical driver configuration in the Opal 23 speakers allows you to listen to music even from a short distance, offering a wide sound stage.
The smallest floorstanding model in the series, which is not inferior in sound quality to its older brothers.
The Opal Monitor bookshelf speakers have a two-way design based on the PSC 18.8 CS/M low-frequency driver. The low-frequency driver has been adapted to work in a smaller enclosure by changing the sensitivity of the suspensions. In the middle frequencies, the paper membrane provides an accurate warmer sound. A 25 mm tweeter with a silk dome is installed in the upper part of the range, which, due to its compact size, allowed the acoustic components to be positioned closer to each other.
This tiny subwoofer will not only fit perfectly into any interior, but will also be able to output 300 watts.
This is a small model of shelf acoustics, where a 25 mm silk dome tweeter with a neodymium driver is responsible for high frequencies.
