Hifiverse

Bookshelf Speakers - Pylon Audio Diamond monitor 18 mkII

Description, images, technical data and specifications

Pylon Audio Diamond monitor 18 mkII
Image source - (c) Pylon Audio

The Diamond Monitor 18 mkII is the second generation of the largest stand-mount in the Diamond series from Pylon Audio, a Polish loudspeaker manufacturer based in Jarocin and founded in 2011. For the mkII every element was redesigned, from the drivers to the cabinet and crossover, and the impedance was changed to 4 ohms. Pylon gives a four-year warranty.

Key specs that matter

This two-way bass reflex design uses a Pylon Audio PSW 18.4.CA/P woofer (Seas CA18RLY/P custom) and a Pylon Audio PST 19.TN tweeter (Scan-Speak D2010/852100). Impedance is 4 ohms, frequency response is 37 Hz - 20 kHz and efficiency is 87 dB. Nominal power is 80 W and maximum power 160 W. Dedicated room size is 12 - 25 m2. Each speaker measures 196 x 420 x 379 mm (W x H x D) and weighs 10 kg. The optional stand measures 196 x 512.5 x 379 mm and weighs 5.1 kg.

Engineering and use context

Pylon's team re-engineered the Norwegian Seas custom woofer. It is made using Spider Ring technology, and its magnetic circuit is reinforced with an additional magnet and works with a lightweight aluminium-copper voice coil of 1 in. diameter. A phase plug replaces the traditional dust cap, the diaphragm is coated lightweight cellulose, and the basket is aluminium with an openwork design. The tweeter is a new Scan-Speak driver with a more powerful neodymium magnet system, reduced voice coil mass and no ferrofluid. Its dual resonance chamber design lowers the primary resonance of the tweeter, and Pylon quotes reduced nonlinear distortion. A faceplate of black cellular rubber surrounds the tweeter.

Only linear components, air-core coils and polypropylene capacitors, are used in the crossover. Compared with the first version the cabinet has a steeper front and back angle, and Pylon states that this improves the time integration of the individual frequency bands. Precisely placed reinforcements and ribs reduce cabinet wall vibration, and natural sheep's wool combined with a new soundproofing material damps standing waves inside. Its bass reflex tunnel has a larger diameter while the cabinet tuning stays similar. Pylon tested the design with a laser vibrometer and in its own anechoic chamber.

A magnetic grille is included. Finishes include oil-wax coated natural oak veneer in eleven colours, 25% gloss lacquered oak veneer, 0% gloss American walnut veneer, white or black lacquer in gloss or matte, and any RAL palette colour.

Pairing

An amplifier stable into 4 ohms is required. The matching stand is available from Pylon as an option.

Alternatives

The Pylon Audio Diamond Monitor 15 mkII is the smallest monitor of the Diamond series, with a Seas-based PSW 15.8.CA/P woofer and 8 ohm impedance.

Specifications

  • Model name

    Diamond monitor 18 mkII

  • Frequency Response low +/- 3dB (Hz)

    37

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    80 - 160

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    19.6 × 42.0 × 37.9

  • Weight (kg)

    10

  • Official link