Zirkon 20 is a slim floorstanding loudspeaker from Pylon Audio of Jarocin, Poland. It took the place of the Emerald series in the catalogue, between the Jade and Diamond ranges. A prototype was shown at the Audio Video Show in Warsaw in 2023, the production version followed at High End 2024 in Munich, and serial manufacture in Jarocin began on 3 October 2024. It is the first Pylon design led by Grzegorz Matusiak, who holds a PhD in acoustics from Wroclaw University of Technology. The launch price in Poland was PLN 15,990 per pair, and the UK price is GBP 3,945.
Key specs that matter
Two Pylon Audio PSW 18.8 CSP-CUT woofers are paired with a custom Seas 27TBCD/GB-DXT tweeter. Frequency response is 33 Hz - 24 kHz. Efficiency is 89 dB and impedance is 4 ohms. Pylon rates power handling at 150 W nominal and 260 W maximum. Each speaker measures 168 x 1,330 x 364 mm (W x H x D) on a 232 x 390 mm base and weighs 27.5 kg. The dedicated room size is 18 - 45 m2.
Engineering and use context
At the core of the design is a newly developed midwoofer. Its basket places a large diaphragm area on a narrow front panel. The diaphragm is ultra-hard cellulose laminated with silk and impregnated for rigidity and low mass. A powerful magnetic circuit with a small-diameter voice coil is used, and Faraday rings are added for magnetic stability. The Seas tweeter uses Diffraction Expansion Technology, and Pylon specifies controlled directivity for it. Drivers are evenly distributed on the baffle, and the distance of the tweeter from the baffle edge was selected during development.
In the crossover Pylon uses only linear components, namely air-core inductors and foil capacitors. Inside, the enclosure is divided into three chambers and optimised for stiffness and the suppression of standing waves. Bass reflex is low-tuned, with the ports placed at the bottom of the cabinet. A magnetic grille is included. Finishes are Black American Walnut natural veneer with 0% gloss lacquer, American Walnut natural veneer with 25% gloss lacquer, and matte White or Black lacquer.
Pairing
An amplifier stable into 4 ohms is required. Amplifier output should stay within the nominal power rating of the speaker.
Alternatives
The Amber mkII is a larger Pylon floorstanding loudspeaker with two PSW 32.8 CS woofers and a PST 25P.8 tweeter, rated at 97 dB and weighing 65 kg per speaker.