The Opal sub is an active subwoofer from Pylon Audio, a loudspeaker maker based in Jarocin, Poland. Pylon designed it to complement the Opal series speakers, and it is intended for home theatre and small stereo systems. Three finishes are offered, Black Ash, Walnut and Wenge, all in PVC veneer. Pylon's standard warranty is two years and can be extended by a further three years when the product is registered.
Key specs that matter
Cabinet type is a dual flared rear bass-reflex design. The woofer is the Pylon Audio PSW 27.8 GFRP. Amplification is class D, rated at 150 W nominal and 300 W maximum. Lower limit frequency is 26 Hz. The low-pass filter is adjustable from 40 to 200 Hz, and phase control covers 0 - 180 degrees, with a volume control alongside. Inputs are high-level, low-level, 2x RCA and LFE. Dimensions are 320 x 420 x 380 mm (W x H x D), and weight is 15 kg.
Engineering and use context
This driver is new for the Opal sub. Its diaphragm is a GFRP composite covered with an extra damping layer, and Pylon states that it gives high rigidity and piston-like operation in the low-frequency range. Driver parameters were selected so that a relatively small enclosure could be used. Both bass-reflex ports are flared and sit on the rear panel.
Thick solid MDF panels form a reinforced enclosure. Pylon measured the cabinet with a laser vibrometer in its own anechoic chamber, located its key points and placed the internal reinforcements according to those measurements. According to the company, this removes unwanted vibration of the enclosure walls.
Inside is a class D amplifier with high energy efficiency, high power, a compact form and low energy consumption. Low-pass filter frequency, gain and phase are regulated smoothly.
Pairing
The matching speakers are the Opal series models. Its high-level input accepts a speaker-level connection from a stereo amplifier. The LFE input matches the subwoofer output of an AV receiver.
Alternatives
The Diamond sub is the Pylon Audio subwoofer designed for the Diamond series.