Hifiverse

Subwoofers — Pylon Audio Diamond sub

Description, images, technical data and specifications

Pylon Audio Diamond sub
Image source - (c) Pylon Audio

The Diamond sub is the active subwoofer of the Diamond series from Pylon Audio, a Polish loudspeaker company established in 2011. Pylon developed it with a strong emphasis on a compact enclosure, and the cabinet carries the angled design of the other Diamond models. In the UK it costs GBP 1,695, and in Australia the price is AUD 3,499 - 3,849 depending on finish.

Key specs that matter

Its woofer is the Pylon Audio PSW 26.4 AA, a custom version of the Seas L26RO4Y2. A Class D amplifier is rated at 350 W nominal and 500 W maximum power. Pylon quotes a lower limit frequency of 25 Hz. The active analogue low pass filter is adjustable over 40 - 200 Hz, phase control covers 0 - 180 degrees, and a volume control is provided. Inputs are high-level, low-level on 2 x RCA and a dedicated LFE input. The cabinet type is a slotted bass-reflex profile. Dimensions are 330 x 458 x 510 mm (W x H x D), and the weight is 33 kg.

Engineering and use context

To keep the enclosure small, Pylon gave the bass-reflex tunnel an unconventional design, intended to reduce turbulence and optimise acoustic losses. According to the company, the angled front of the cabinet directs the front of the acoustic wave toward the listening area. Ribbing and carefully placed reinforcements stiffen the enclosure.

Behind the diaphragm, the driver has a sizable magnetic circuit for a strong and stable magnetic field. Its rigid openwork basket is injection moulded from metal, and Pylon states that it minimises air loss and noise and suppresses unwanted reflections and resonances. The stiff diaphragm has virtually no natural resonances in the operating range of the subwoofer. A low-loss rubber surround and a linear spring control the excursion, which is limited by the amplifier protection. More than 90% of the power delivered to the Class D amplifier reaches the voice coil.

When an AV processor manages the bandwidth, the LFE input bypasses the filter and other controls of the subwoofer. Finishes include natural oak veneer with an oil-wax coating in 11 colours, natural oak veneer under 25% gloss lacquer, natural American walnut veneer under 0% gloss lacquer, white or black in gloss or matte lacquer, and individual colours from the RAL palette.

Pairing

The high-level input takes the speaker outputs of an amplifier, and the RCA inputs take the PRE-OUT of a preamplifier or integrated amplifier. An AV receiver or processor connects to the LFE input. The matching loudspeakers are the Diamond series models.

Alternatives

The Pylon Audio Opal sub is a 15 kg Class D subwoofer with 150 W nominal power, a PSW 27.8 GFRP woofer and a dual flared rear bass-reflex design.

Specifications

  • Model name

    Diamond sub

  • Frequency Response low +/- 3dB (Hz)

    40

  • Frequency Response high +/- 3dB (Hz)

    200

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    350 (nominal); 500 maximum

  • Size (sm)

    33.0 × 45.8 × 51.0

  • Weight (kg)

    33

  • Official link