AudioSolutions

AudioSolutions company perented Figaro BL2 in new color finish – now bockshelf loudspeakers availble in British Racing Green. Technical specification are the same as standart AudioSolutions Figaro BL2.

The AudioSolutions Overture O302B is a bookshelf two-way speaker with a rigid body structure that uses a case-within-case system.

Phase-linear crossover on inductors with an air core, mounted on a printed circuit board with ultra-thick copper foil.

The AudioSolutions Overture O303F is a two-way floorstanding loudspeaker in the MTM configuration with a specially adapted dome tweeter with a silk diffuser and two midbass speakers with ER diffusers.

The AudioSolutions Overture O304F is a three-way floorstanding loudspeaker with a specially adapted dome tweeter with a silk diffuser, one midrange and two midbass speakers with ER diffusers.

The AudioSolutions Overture O305F is a three—way floorstanding loudspeaker with a specially adapted dome tweeter with a silk diffuser, one midrange and two midbass speakers with ER diffusers.

The AudioSolutions Overture O306F features a three-way design that includes a tweeter with a 25mm silk dome, a 152mm midrange paper driver, and two 230 mm woofers with paper diffusers.

The model uses the following drivers: a 19mm silk dome tweeter, a 15.2cm midbass driver with an ER paper diffuser.

This model received a 19 mm tweeter with a silk dome, a 15.2cm ER driver with a paper diffuser, and two 15.2cm ER drivers with a paper diffuser.

The light blue case features a 19mm tweeter with a silk dome, a 15.2cm midrange ER driver with a paper diffuser, and a pair of 18.3cm ER bass speakers with a paper diffuser.

AudioSolutions Figaro L2 is a three—way floorstanding loudspeaker. The speakers are assembled on the basis of a self-locking design with "Body-in-body" technology.

The Audio Solutions Figaro XLm2 floorstanding loudspeaker is a slightly scaled—down version of the Figaro XL2 model.

The Figaro XL2 is equipped with an upgraded tweeter with a soft dome and a mini-horn. ER paper diffusers are used for midrange and bass drivers.

Occupying a place in the company's nomenclature between the Figaro and Vantage 5th Anniversary series, Virtuoso acoustics is characterized by an improved Box-in-a-Box housing made of multilayer plates.

AudioSolutions Virtuoso S are floorstanding loud speakers with a height of 1.13 m. They are a smaller version of the Virtuoso M model.

AudioSolutions Virtuoso M - стильные акустические системы с рядом инновационных элементов. Корпуса АС выполнены по принципу "коробка в коробке" и гарантируют подавление вибраций в 10 раз большее, чем традиционные решения.

The design of the model is traditional for this series – a tweeter with a silk dome with a diameter of 30 mm is responsible for high frequencies, two drivers with 242 mm paper cones work on the bass. The mid-frequency range in the range from 500 to 6500 Hz is voiced by a single driver with a 190 mm diameter cellulose diffuser.

Audio Solutions Vantage B uses a 2.5cm beryllium tweeter, a 17 cm midrange driver with an Egyptian papyrus diffuser, and a 22 cm paper woofer for bass. The height of the speaker with racks is almost 1.3 m.

The Vantage S (Small) is the most compact floor speaker in the series. The height of the front panel is only 104 cm, which makes the acoustics visually very compact. Gradually increasing in the direction of the rear panel, the height reaches 121 centimeters. Despite its small size, this speaker system is capable of producing oversized, voluminous and fast bass.

Vantage M (Medium) is an average floorstanding loudspeaker in the series. Developed based on the same philosophy as the other products in the series, it has the same stage scale. Similar to the B model, designed for listening from a short distance, or the S model, designed for listening from a normal distance, but for small rooms, the Vantage M is designed for daily use in rooms from 30 to 100 square meters.

The design of the Audiosolutions Vantage L is very complex - a custom 1' beryllium tweeter is responsible for the treble, followed by a 7.5' midrange driver (with a papyrus diffuser), and 2 x 8' (paper diffusers) and 1 x 12' (aluminum diffuser) woofers are responsible for the bass. The exterior coating of the case is made using 3D vinyl.