ATC

The model uses a 6-inch woofer/midrange driver with a diffuser made using Constrained Layer Damping technology (it reduces harmonic distortion and improves frequency response on and off the axis), and an inch tweeter with a soft dome and a unique dual suspension system is responsible for reproducing high frequencies.

ATC SCM12i PRO (PASSIVE) is a set of two passive 2–way near-field studio monitors with mounts compatible with many wall or ceiling mounting brackets. Acoustics are designed for recording studios, post-production, broadcast and film studios.

The model has a new high-energy soft dome tweeter with a double suspension of its own design "ATC SH25-76S" S-Spec with a diameter of 25 mm, which behaves excellently even at the highest output power levels, ensuring low distortion throughout the entire operating frequency band.

The model has a 6.5-inch woofer with a 3-inch sound coil and Super Linear technology that reduces the third harmonic and increases detail. An inch tweeter with a fabric dome and a dual suspension system is also used.

The SCM50ASLPro is equipped with a nine-inch ATC Super Linear high-end bass driver, delivering deep and powerful bass frequencies. The patented suspension sound coil design creates incredibly low distortion levels even at high volume levels.

The speakers are equipped with a Seas Excel dome tweeter with a diameter of 25 mm, a silver wire coil and a powerful magnetic system consisting of two neodymium magnets. Next comes the famous horn-dome midrange driver, equipped with a 75 mm diaphragm, a 75 mm sound coil, and a massive magnetic system weighing more than 7 kilograms.

ATC SCM110ASL PRO is a set that includes two 3-way active studio monitors. Each of them uses an inch tweeter, a 3-inch midrange driver, and two 9-inch woofers.

The ATC SCM150ASL PRO monitors, designed to reproduce stereo and multi-channel sound in high quality, consist of one super-linear woofer with a diameter of 375 mm (15 inches), a midrange driver with a soft dome with a diameter of 75 mm (3 inches) and a high-quality compression tweeter with a soft dome with a diameter of 25 mm (1 inch), and the internal volume of the monitor is 150 liters.

The reproduction of bass and midrange frequencies in this model is assigned to a 6.5" driver with an impedance of 8 ohms, which implements proprietary Super Linear technology, which significantly reduces the third harmonic, which has a beneficial effect on detail. As for the high-frequency radiator, the SCM20ASL Pro MKII uses a new, improved 1" SH25-76S tweeter with a fabric dome.

The ATC SCM300ASL PRO is a kit that includes two active studio monitors and external P4 power amplifiers. The speakers are 3–way large-format main far-field monitors.

The subwoofer is equipped with a 12” woofer (SS75-314SC) of its own design and an AB-class discrete amplifier. It also has the ability to turn off/on remotely using a series-connected footswitch with a lock, without affecting the through connectors of full-range monitors (footswitch is supplied separately).

The subwoofer is equipped with a 12” woofer (SS75-314SC) of its own design and an AB-class discrete amplifier. It also has the ability to turn off/on remotely using a series-connected footswitch with a lock, without affecting the through connectors of full-range monitors (footswitch is supplied separately).

The model received a new soft dome tweeter with a double suspension of its own design “ATC SH25-76” with a diameter of 25 mm, which behaves excellently even at the highest output power levels, ensuring low distortion throughout the entire operating frequency band.

The case of the new ATC SCM11 speaker has received new curved shapes with a working volume of 11 liters, preventing the occurrence of so-called standing waves. Externally, the body of the systems is finished with high-quality veneer of expensive woods in black and light versions. The new ATC SCM11 speaker model demonstrates an impedance curve free of low values, representing a light load for amplifiers from 75 to 300 watts.

The ATC SCM19 acoustics are perfect for building an excellent Hi-End stereo system with great sound. All this works to create a speaker system with exceptional fidelity and neutrality.

The ATC SCM 19A active floorstanding loudspeakers feature a self-designed soft dome tweeter with a 25 mm diameter, which performs excellently even at the highest output power levels, ensuring low distortion throughout the entire operating frequency band.

The speakers are equipped with a unique midrange driver, the 3-inch TC Soft Dome MidRange, which provides full alignment and better performance. The driver has an exceptionally low color and high power in the frequency range from 350 Hz to 3.5 kHz.

The speakers have new 242W three-band amplifiers (Tri-amplifier treble-32W, midrange-60W, woofer-150W) of class A/B, made from high-quality audiophile-grade components. New active filters and overload protection, providing superior power and excellent clarity and precision of sound.

With the ATC SCM20 passive studio monitors, you will hear an amazing improvement in the sound of your studio. AOC monitors are hand-made in the UK using state-of-the-art components and processes, and you will immediately know why they are considered one of the best reference monitors in the world.

The ATC SCM50ASL Pro three-way active speaker system is designed using the latest scientific achievements in the field of acoustics, and is manufactured on modern equipment using modern high-tech and expensive materials.

The ATC SCM 50SL speakers are a kind of benchmark for home acoustics, which many professional record companies are also guided by.

The speakers are equipped with a Seas Excel dome tweeter with a diameter of 25 mm, a silver wire coil and a powerful magnetic system consisting of two neodymium magnets. Next comes the famous horn-dome midrange driver, equipped with a 75 mm diaphragm, a 75 mm sound coil, and a massive magnetic system weighing more than 7 kilograms.

A powerful bass вкшмук with a paper diffuser, 314 mm in diameter, manufactured using proprietary SLM technology, developed back in 1986, is responsible for the low-frequency component of the sound in this model. This technology eliminates the eddy currents that occur on the surface of the metal parts of the driver, which causes nonlinear sound distortion.

The ATC SCM150ASL Professional Acoustics is a new active three-band reference-level monitor that can play both high-quality music and movie soundtracks in an unsurpassably high sound quality.

The ATC SCM 150 SL can produce high-quality sound with a maximum and continuous sound pressure of 117 dB SPL. The housing of the Classic series speakers, the surface of which is finished with precious wood veneer, has a classic design of strict cabinets. The acoustics of the ATC SCM 150 SL also feature an improved bass reflex port and wide symmetrical dispersion.

The active SCM 20 ASL T model is equipped with an integrated ATC two-way amplifier with 2-way active crossovers and Class A/B MOSFET power amplifiers providing a total output power of 250 watts.

The model is equipped with a set of 150mm LF TC + 25mm Special Twitter drivers. The recommended power of the connected amplifier can range from 75 watts to 300 watts.

The ATC SCM50 ASLT Tower is an excellent 3–way active floorstanding loudspeaker of the Tower series phase inverter type. The speaker systems of the ATC Tower series have a monumental appearance, reminiscent of the towers of an ancient castle.

The high-frequency, mid-frequency and low-frequency drivers, as well as all electronic components of the ATC SCM 50 PSLT Tower floor speakers, are designed and manufactured at ATC's own plant in England in such a way as to create an active system "without compromise".

The ATC SCM100ASL monitor uses a three-way design, a long-standing tradition in the ATC product line. The ATC SCM100ASL speaker uses a soft dome of the midrange driver diffuser with a new waveguide, which fully help to open the midrange at a maximum and unparalleled level.

The monumental passive acoustics of the ATC Tower SCM100PSLT, reproduces powerful, precise and crystal clear sound that is beyond the capabilities of passive speakers from third-party manufacturers.

The monumental passive acoustics of the ATC Tower SCM100PSLT, reproduces powerful, precise and crystal clear sound that is beyond the capabilities of passive speakers from third-party manufacturers.

The speaker systems of the ATC Tower series have a monumental appearance, reminiscent of the towers of an ancient castle. The SCM150 is designed to be used as a home Hi-End stereo system or to work in a high-level recording studio (the professional version of the ATC SCM150 ASL Pro is usually used).

These systems use the ATC SM-150 proprietary midrange driver with a diameter of 75 mm, equipped with the unique ATC SLMM (Super LinearMagnet Material) technology. This midrange driver has a powerful magnetic system weighing 9 kilograms.

The model features a unique 3" ATC Soft Dome Mid-Range mid-frequency driver (1976), which is equipped with all ATC 3-band speakers and provides full alignment and better performance, as well as exceptionally low color and high power in the frequency range from 350 Hz to 3.5 kHz.

The ATC SCM300ASLT is a 3-way active floorstanding loudspeaker of the Tower series phase inverter type. Designed to be used as a home Hi-End stereo system or to work in a high-level recording studio.

The SCM20ASL Limited Edition is equipped with ATC's proprietary 150mm midrange/woofer "Super Linear" in combination with a 25 mm diameter S-Spec high-frequency driver with dual suspension.

Improvements to the SCM50SE's design include all discrete electronics replacing operational amplifiers in the amplifier stages, nickel piping on top and sides, and a corresponding nickel-plated flat plate that covers the amplifier at the back, hiding the cooling fins with a second ventilated panel.

The SCM100SE is a 3-way active floorstanding loudspeaker from the British company ATC with an output power of 200 watts (woofer), 100 watts (midrange), 50 watts (treble).

The high-resolution "ATC SCM150PSLT Tower" loudspeakers from the British company "ATC loudspeakers" have received a new high-energy soft dome tweeter of their own design "ATC SH25-76S" S-Spec with a diameter of 25 mm, which behaves excellently even at the highest output power levels, ensuring low distortion throughout the entire operating frequency band. Unlike conventional tweeters, this precision part uses two gimbals, offering much more control over the sound coil and dome movement, especially at high sound pressure levels.

The ATC C1 Sub Mk2 is powered by a 200W Class A/B MOSFET power amplifier in a common source circuit with a new enlarged power supply section. This combination allows the ATC C1 Sub Mk2 to achieve very low bass of 25 Hz (-6 dB) while maintaining the highest sound quality.

The ATC C4 Sub Mk2 is equipped with a patented 12-inch driver and amplifier operating in class A/B and developing 300 watts.

The subwoofer received a 375 mm driver and a powerful amplifier capable of producing 450 watts at the output.