Ascendo

The Ascendo System M5S floorstanding loudspeaker is a four-way passive speaker with a bass reflex, an 8.6" driver, a ribbon tweeter in a remote housing with resonant isolation, and a steel stand with adjustable height relative to the listening point (from 50 to 190 cm). The case is made of a combination of special noise-absorbing bitumen and MDF to reduce vibrations.

The Ascendo System M5S SE Active Piano White floorstanding speaker is a special edition of a four-band active speaker with a bass reflex, an 11" driver, a ribbon tweeter in a remote housing with resonant isolation, and a steel stand with adjustable height relative to the listening point (from 50 to 190 cm).

The Ascensio System M5 Piano Black floorstanding loudspeaker is a four-band passive speaker with a bass reflex, an 8.6" driver, and a ribbon tweeter. The case is made of a combination of special noise-absorbing bitumen and MDF to reduce vibrations.

The model has an 8.6-inch driver, complemented by a ribbon tweeter. The device operates in the frequency range of 26 Hz – 42,000 Hz with a sensitivity of 91 dB.

The Sub-S1 is a passive subwoofer with a 26mm driver. The case is made of stainless steel, and some components are made of plastic.

The Ascensio System I 5 Piano White floorstanding loudspeaker is a four-band passive speaker with a bass reflex, an 8.6" driver and a ribbon tweeter.

The model has a modular design with a resonantly decoupled drivers installation. In addition, it has received support for SMB technology.

The Accento D9 floorstanding loudspeaker is a coaxial 4-way passive speaker with a bass reflex and a 9" driver. The model assumes additional decoupling of the housing using a special double-layer steel stand and additional dampers.

The Ascendo D7 Piano White floorstanding loudspeaker is a coaxial 4-way passive speaker with a bass reflex, a 7" driver.

Ascendo D6 is a coaxial 2-way passive speaker with a bass reflex, 7" driver. The frequency range is 44 Hz - 25 kHz. The impedance is 6 ohms. The sensitivity is 88 dB.

M5S Active - four-way active speaker with a bass reflex, 11" driver, ribbon tweeter in a remote housing with resonant isolation, steel stand with adjustable height relative to the listening point (from 50 to 190 cm)

The case is made of a combination of special noise-absorbing bitumen and MDF to reduce vibrations. The set includes 4 DNA1002 HE -V amplifiers with DSP and USB network interface (3 Ethernet ports).

The case has an 8.6-inch driver and a ribbon tweeter. The model is equipped with a phase inverter, and the maximum power is 1650 watts.

The active subwoofer is equipped with a 28-cm bass and can output up to 650 watts of power from the built-in amplifier.

The model is made in a four-band configuration, equipped with an 8.6-inch driver and a ribbon tweeter. There is also a bass reflex

Ascendo D9 Active floorstanding loudspeaker with proprietary SAB Bass System technology. A pair of DNA1002 HE -V amplifiers with DSP and a USB network interface (3 Ethernet ports) are included.

The model is made in a four-band configuration, equipped with a 7-inch driver and a bass reflex. The device outputs a maximum of 1000 watts.

The Ascendo D6 Active floorstanding loudspeaker is equipped with proprietary AIR Speaker Management technology to optimize indoor sound.

The Ascendo Live 15 uses a fully active circuit with built-in gain of 2 x 1,650 watts. There is also a mode switch from cinema (acoustics perfectly match with a pair of subwoofers) to Hi-Fi/High End. The Ascendo Live 15 is controlled by a three-channel DSP processor.

The Ascendo Live 15 uses a fully active circuit with built-in gain of 2 x 1,650 watts. There is also a mode switch from cinema (acoustics perfectly match with a pair of subwoofers) to Hi-Fi/High End. The Ascendo Live 15 is controlled by a three-channel DSP processor.

The Ascendo Immersive Audio SMSG 15 subwoofer is compact and powerful, equipped with a specially manufactured 15“ neodymium driver with exceptionally low distortion.