Hifiverse

Напольная акустика — Fyne Audio VINTAGE CLASSIC X

Описание, изображения, технические характеристики и спецификации

Fyne Audio VINTAGE CLASSIC X
Источник изображения — © Fyne Audio

The Vintage Classic X is a floorstanding loudspeaker from Fyne Audio that combines a 1970s look with modern acoustic engineering in a large cabinet. It is built around a 250 mm IsoFlare point source driver and a BassTrax ported enclosure, finished in walnut veneer. The UK price is GBP 6,499.99 per pair, GBP 2,000 above the Vintage Classic VIII. A separate Vintage Classic Gold X SP version exists in the Gold SP Series costing GBP 9,999.99 a pair and using a birch ply enclosure, a neodymium magnet tweeter and Deep Cryogenically Treated crossover parts.

Key specs that matter

Sensitivity is 94 dB for 2.83 V at 1 m, with an 8 ohm nominal impedance. Fyne Audio lists a response of 28 Hz to 26 kHz at minus 6 dB, typical in room. Amplifier power should range from 20 to 280 W RMS, while continuous power handling is 140 W RMS and peak handling reaches 560 W. The cabinet measures 918 mm in height, 450 mm in width and 381 mm in depth, and each speaker weighs 45.2 kg.

Engineering and use context

In the IsoFlare unit, the cone of multi-fibre material handles bass and midrange around a 75 mm titanium alloy dome compression tweeter powered by a ferrite magnet system, giving both bands a common origin. The two ways divide at 750 Hz, and the low loss passive network, wired for bi-wiring, uses 2nd order slopes on both filter sections. Its parts are Cryo-Lite treated. Front panel adjustments cover high frequency energy from 1.8 kHz upward and the 2.5 kHz to 5.0 kHz region, each by plus or minus 3 dB. Heavy internal bracing reinforces a cabinet of high density fibreboard dressed in walnut. A downward firing port exits onto a BassTrax Tractrix diffuser at the bottom, meaning the port does not face forward or backward. The compression tweeter marks a change from the smaller Vintage Classic VIII, which uses a 25 mm magnesium dome.

Pairing

Given its sensitivity and nominal load, the X is an easy match for amplifiers of modest output. Larger solid state amplifiers also fall inside the upper limit. Twin terminal pairs permit the two sections to be bi-wired or driven by separate amplifiers.

Alternatives

For a smaller floorstander from the same range, the Fyne Audio Vintage Classic VIII has a 200 mm IsoFlare driver in an 873 mm tall cabinet weighing 29.1 kg.

Характеристики

  • Название модели

    VINTAGE CLASSIC X

  • Нижняя граница частотного диапазона +/- 3дБ (Hz)

    28

  • Верхняя граница частотного диапазона +/- 3дБ (Hz)

    26 000

  • Чувствительность (dB at 1 W/1m)

    94

  • Импеданс (Ohms)

    8

  • Требования к усилителю мощности (W)

    20 - 280

  • Наличие встроенного усилителя

    Н/д

  • Мощность встроенного усилителя (W)

    N/A

  • Размер (sm)

    91.8 x 45.0 x 38.1

  • Вес (kg)

    45.2

  • Официальная ссылка

Другие компоненты