Полочная акустика — HECO Victa Elite 302

The Victa Elite 302 is the bigger of the two compact models in HECO's Victa Elite series, sitting above the Victa Elite 202. The German brand points to more than seven decades of loudspeaker production, and this passive two-way stand-mount relies on bass reflex loading to extend its low end. Buyers choose between black and white versions, and the styling matches the other members of the series with its ringed woofer trim and curved side walls.

Key specs that matter

Inside sit a 170 mm woofer and a 28 mm Fluktus tweeter, divided by a crossover at 3,000 Hz. Its rated bandwidth spans 33 Hz to 40,000 Hz and a sensitivity of 90 dB at 2.8 V and 1 m. Nominal impedance is stated as 4 to 8 ohm. The speaker is rated to handle 80 W continuous and 150 W peak, and HECO recommends amplifiers delivering between 30 and 150 W. Each cabinet is 202 mm wide, 352 mm high and 310 mm deep, with each unit weighing 6.7 kg, noticeably taller and deeper than its smaller sibling.

Engineering and use context

HECO specifies a lightweight long-fibre type woofer cone in a sturdy steel chassis, trimmed with a decorative ring fixed by eight screws. For the tweeter, HECO developed a new acoustic flange shape around the Fluktus dome. The enclosure is described as solid, with rounded side panels made from several layers of material rather than a single flat board. Supplied rubber spikes are meant to isolate the box acoustically when it stands on a shelf or sideboard. The connection panel uses solid gold-plated screw connectors in an encapsulated housing, doubled so that bi-wiring and bi-amping are possible. The larger volume compared with the 202 is what gives the 302 its slightly lower quoted bass limit while keeping the same pair of drivers. Its depth should be checked against the shelf or stand top before purchase, since the box needs room behind it for the rear connections and cables.

Pairing

The recommended power window suits most current integrated models and receivers, while the sensitivity lets the lower end of that range reach useful levels in a 20 m2 room. Since the load can drop to 4 ohm, an amplifier stable into such impedances is advisable, and removing the terminal bridges allows two amplifier channels per speaker for anyone who wants to split the bass and treble feeds.

Alternatives

HECO's Victa Elite 202 is the smaller bookshelf option of the series, less than 18 cm wide and weighing 4.4 kg.