The ELARGO 100 is a 3-way bass-reflex floorstanding loudspeaker from Gauder Akustik of Renningen, Germany. Of the two floorstanding models in the Elargo series introduced in 2024 it is the smaller one, and the series also includes the Elargo 200 and the Elargo Center for multi-channel systems. Gauder designed it for living rooms where loudspeakers are part of the furnishings. Unlike the Berlina and DARC models, whose cabinets are stacked from ribs, the Elargo has a drop-shaped cabinet of several layers. A pair costs EUR 23,998 in Germany with the standard tweeter.
Key specs that matter
Nominal impedance is 4 ohms and power handling is 280 W. Each speaker is 119 cm high, 26 cm wide and 38 cm deep and weighs 40 kg. Two 178 mm XPulse special long-throw bass drivers, an XPulse midrange driver and a hand-selected beryllium tweeter make up the driver complement, and a diamond tweeter is available as an option. Finishes are piano lacquer black, piano lacquer white and rosewood high gloss. Gauder publishes no sensitivity or frequency response figures.
Engineering and use context
Both bass drivers have a stiffened aluminium cone and a rear-ventilated centering spider. They work on the down-firing principle, which Gauder uses for even room excitation, and the bass-reflex cabinet is downward-ventilated. The XPulse midrange driver has a lightweight, damped aluminium cone, a rear-ventilated spider and its own closed enclosure. Its tweeter combines an ultra-light beryllium dome with an iron-neodymium-boron magnet. Retrofitting the diamond tweeter is possible at any time without replacing the crossover.
Inside, the drop-shaped cabinet is heavily braced, and Gauder's highly damped insulation material lines the closed midrange and treble enclosure. The symmetrical crossover uses Mundorf components with filter slopes of more than 50 dB per octave and has TDC Time Delay Control integrated. Internal wiring is Clearwater cable.
On the rear panel are the bass volume control with three levels (-1.5 dB, linear, +1.5 dB) and two sockets of the Bass Extension System for a bridge or modules. Height is set with four geared adjustment knobs and a scale, and four shims are included. A front grille with magnetic holder is optional.
Pairing
A power amplifier stable into 4 ohms is required. Its four WBT NextGen binding posts allow bi-wiring or bi-amping. The Elargo Center is the matching centre speaker for a multi-channel system.
Alternatives
The ELARGO 200 is the bigger floorstanding Elargo, with two 22 cm bass drivers, a 126 cm cabinet, 50 kg weight and 480 W power handling.