Hifiverse

Floorstanding loudspeakers - Gauder Akustik DARC 240 MK II

Description, images, technical data and specifications

Gauder Akustik DARC 240 MK II
Image source - (c) Gauder Akustik

The DARC 240 MK II is a three-way floorstanding loudspeaker in the DARC MK II series from Gauder Akustik of Renningen near Stuttgart. Four bass units sit one above the other in a slim aluminium tower, an arrangement Gauder specifies for even excitation of the room modes in a living room. German list price is EUR 99,998 per pair.

Key specs that matter

Gauder lists the model as a 3-way quadruple bass reflex loudspeaker. Nominal impedance is 4 ohms and power handling is 1250 W. Each speaker measures 1960 x 300 x 450 mm (H x W x D) and weighs 138 kg. Its hand-selected driver complement is black bass units, a mass-optimised XPulse sandwich woofer-midrange and an ultralight beryllium tweeter.

Engineering and use context

Inside the acoustically optimised quadruple bass reflex enclosure there are two vented chambers and one closed chamber. Its walls are solid aluminium ribs stacked on top of each other with damping ribs packed between them, a construction Gauder calls RC rib technology and whose development was funded by the German Federal Ministry of Research. According to Gauder, the intermediate dampers stop sound conduction inside the walls and remove the bell sound of plain aluminium. A drop-shaped cross-section reduces reflection and diffraction at the cabinet and adds stability.

Each crossover is symmetrical, with 60 dB/octave slopes, Mundorf and Intertechnik components and Clearwater internal wiring. In this layout the negative pole of the drivers is decoupled from the system ground by crossover components. Time Delay Control, a circuit integrated in the crossover, delays the tweeter signal so that it radiates together with the woofer-midrange. Gauder puts the electrical delay of the crossover inductors at approx. 2 ms and the geometric offset of the drivers at only 0.1 ms. The beryllium tweeter can be replaced by a diamond tweeter at any time without crossover conversion.

Jumpers on the base set bass and tweeter level to -1.5 dB, 0 dB or +1.5 dB. With the Bass Extension jumper inserted the lowest octave is raised by 4 dB, and plug-in BE modules give +1, +2, +3 or +3.5 dB. The Big Foot base carries spikes adjustable from above, and MusicLight and a VU meter are options.

Pairing

An amplifier stable into 4 ohms is required. Bass Extension lowers the impedance between 25 Hz and 35 Hz, and with the jumper removed the speaker can run from a smaller tube amplifier. The WBT NextGen terminals allow bi-wiring or bi-amping.

Alternatives

The DARC 500 MK II is the four-way quadruple bass reflex model of the series with a ceramic and diamond mid/high-range unit.

Specifications

More components