Hifiverse

Floorstanding loudspeakers - Gauder Akustik DARC 750 MK II

Description, images, technical data and specifications

Gauder Akustik DARC 750 MK II
Image source - (c) Gauder Akustik

The DARC 750 MK II is the tallest and heaviest model in the DARC MK II table of Gauder Akustik, the loudspeaker maker from Renningen near Stuttgart, and has the highest power handling. Its 90 mm diamond midrange extends the use of diamond diaphragms from 600 Hz up to 80 kHz. Below that unit four bass units sit one above the other in a slim aluminium tower, as in the DARC 240 MK II and DARC 500 MK II. German list price is EUR 599,998 per pair.

Key specs that matter

Gauder lists the model as a 4-way quadruple bass reflex loudspeaker with diamond mid/high-range unit. Nominal impedance is 4 ohms and power handling is 1280 W. Each speaker measures 2010 x 300 x 450 mm (H x W x D) and weighs 170 kg. Drive units are hand-selected black XPulse bass units, a ceramic bass/mid driver, the 90 mm diamond midrange and a diamond tweeter. Besides brushed natural aluminium and powder coat in black, white, silver or anthracite, it is offered in black high gloss and anthracite high gloss.

Engineering and use context

In the DARC 250 MK II and DARC 500 MK II the mid/high-range unit uses a 50 mm diamond midrange. This model has a 90 mm diamond membrane instead, usable from 600 Hz, and Gauder states that it removes unwanted beaming, improves the impulse response and allowed a more elaborate crossover. The ceramic driver and both diamonds are mounted on a common aluminium flange, so the geometry is identical in every speaker. Each driver has a 3D-printed housing with a defined rear volume that is part of the transfer function calculation.

Its crossover is symmetrical, with a 60 dB/octave slope and Mundorf components, and includes Time Delay Control. This circuit delays the tweeter signal electrically so that it radiates together with the midrange. Gauder puts the electrical delay of the crossover inductors at approx. 2 ms against a geometric offset of 0.1 ms.

Two vented chambers and one closed chamber make up the quadruple bass reflex enclosure. Its walls are aluminium ribs with intermediate damping ribs, a construction funded by the German Federal Ministry of Research, and on brushed versions each rib is brushed by hand and then lacquered. Four adjustment screws with a fine gear and four scales showing the distance to the floor sit on the Big Foot base. Jumpers set bass and tweeter level to -1.5 dB, 0 dB or +1.5 dB, and Bass Extension raises the lowest octave by up to 4 dB.

Pairing

An amplifier stable into 4 ohms is required. With the Bass Extension jumper removed the impedance between 25 Hz and 35 Hz rises. The WBT NextGen terminals allow bi-wiring or bi-amping.

Alternatives

The DARC 500 MK II has the same four-woofer layout and ceramic and diamond unit with a 50 mm diamond midrange.

Specifications

More components