Hifiverse

Floorstanding loudspeakers — Audio Physic CARDEAS

Description, images, technical data and specifications

Audio Physic CARDEAS
Image source - (c) Audio Physic

The Cardeas is a four-way floorstanding loudspeaker from Audio Physic of Brilon, Germany. Audio Physic redeveloped the current version from scratch around its PowerTrain, a set of new components with spiderless drivers at its centre. Finishes are high-gloss glass in black, white or anthracite and high-gloss real wood veneer in black ebony or rosewood.

Key specs that matter

Drive units are a 39 mm HHCT III+ tweeter, a 150 mm HHCM SL+ midrange, two 180 mm Double Surround mid-woofers and two internal 280 mm Double Surround woofers. Frequency range is 25 Hz - 40 kHz. Sensitivity is 89 dB and impedance is 4 ohms. Recommended amplifier power is 40 - 350 W. Each speaker measures 1280 x 250 x 430 mm (H x W x D) and weighs about 59 kg in wood or 63 kg in glass. A VCF V Magnetic plus M8 speaker set and a black glass grille are included.

Engineering and use context

Its asymmetrical enclosure is a multi-layer sandwich. Inside is a honeycomb and multiplex sandwich, and the outside is clad with a compound of glass and elastomer layers, which Audio Physic describes as rigid with high internal damping. The internal bracing is made of the same honeycomb panels. A separate sub-enclosure decouples the tweeter and the crossover from the main cabinet.

None of the cone drivers uses a centering spider. Audio Physic says this avoids the non-linearity of conventional designs. In the Double Surround mid-woofers and woofers a second surround takes the place of the spider. The HHCT III+ tweeter is more tightly selected than the HHCT III, and both tweeter and midrange have WBT Plasma Protect contacts.

At the rear sits a fully decoupled VCT Vibration Control Terminal, now with improved WBT pole terminals and newly developed capacitors that use a foamed copper lattice for a low-impedance connection. The supplied VCF V Magnetic feet let the speaker rest on a magnetic field, decoupled from the floor.

Pairing

An amplifier stable into 4 ohms with an output inside the recommended range is required. The standard terminal is single-wire, and a bi-wiring or bi-amping terminal is available on request.

Alternatives

The Avanti is the smaller three-way floorstanding loudspeaker in the Audio Physic range.

Specifications

  • Model name

    CARDEAS

  • Frequency Response low +/- 3dB (Hz)

    25

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    89

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    40 - 350

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    128 × 25 × 43

  • Weight (kg)

    59 (wood), 63 (glass)

  • Official link

More components