The Classic 15 is a slim floorstanding loudspeaker in the Classic Line of Audio Physic GmbH of Brilon, Germany. Audio Physic currently lists it as the Classic 15 Last Edition, next to the Classic 25 Last Edition. Real wood versions in walnut or cherry combine the veneer with black glass on the narrow front, and full glass finishes are offered in black, white and anthracite.
Key specs that matter
Design is two-and-a-half-way, vented. Drive units are a soft dome tweeter, a 150 mm HHCM III mid-woofer and a 150 mm HHCM III woofer. Frequency range is 38 Hz - 30 kHz. Sensitivity is 89 dB and impedance is 4 ohms. Recommended amplifier power is 20 - 120 W. Each speaker measures 990 x 170 x 240 mm (H x W x D) and needs a space of 210 x 300 mm (W x D). Weight is 16 kg in wood and 19.5 kg in glass. A black glass grille and a spike set are supplied.
Engineering and use context
In this layout the woofer covers the range up to 500 Hz in parallel with the mid-woofer. Both have glass fibre cones, but surround, motor and voice coil are optimised for their respective frequency range. A fixed phase plug in the mid-woofer improves the ventilation of the oscillating system.
For the first time in the Classic series, Audio Physic uses its dual basket design. Instead of a single basket, each HHCM III driver has two separate baskets, and according to Audio Physic this reduces the mechanical transmission of micro-vibrations between drivers and enclosure.
The soft dome tweeter comes from a German specialist company and has an elaborately ventilated oscillating system. A small horn-shaped sound guide surrounds the dome. The cabinet uses Audio Physic's sandwich construction, where the weight of the glass panels adds damping in the glass versions.
Its reflex port is located in the bottom plate above the solid plinth and radiates downwards. The actual reflex opening is formed by a stiff, fine-pored ceramic plate instead of a conventional reflex tube. VCF II Magnetic M8 plus feet are available as an option for decoupling from the floor.
Pairing
An amplifier stable into 4 ohms is required. Its output per channel should fall within Audio Physic's recommended power range.
Alternatives
The Classic 25 Last Edition is the other floorstanding model currently listed in Audio Physic's Classic Line.