The Avanti is a three-way floorstanding loudspeaker from Audio Physic of Brilon, Germany. Today's Avanti is not a relaunch of the earlier Avanti but a newly developed loudspeaker. It is offered in high-gloss glass in black, white or anthracite and in high-gloss rosewood real wood veneer.
Key specs that matter
Drive units are a 39 mm HHCT V tweeter, a 150 mm HHCM V SL midrange and an internal 215 mm paper cone woofer. Frequency range is 31 Hz - 40 kHz. Sensitivity is 88 dB and impedance is 4 ohms. Recommended amplifier power is 30 - 180 W. Each speaker measures 1087 x 170 x 290 mm (H x W x D). Weight is about 22 kg in wood and 27.5 kg in glass. A black glass grille and a spike set are included.
Engineering and use context
With the Avanti, Audio Physic used the fifth generation of its HHC cone technology for both the tweeter and the midrange for the first time, and the company states that harmonic distortion was reduced again. Both drivers have RECOTec diaphragms, a carbon fibre mesh embedded in a polypropylene matrix without adhesives or synthetic resins. The HHCM V SL midrange works without a spider. A dual-basket design connects each driver chassis only indirectly to the baffle.
Inside the cabinet, reinforcements of open-pored ceramic foam reduce partial vibrations of the enclosure. Ceramic foam is stiffer than MDF yet consists of 85% air, so the space taken by the bracing still counts toward the air volume available to the drivers. The 8.5-inch long-throw woofer is mounted neither on the front nor on the side but in its own housing in the interior, and this housing is also stiffened with ceramic foam. Audio Physic lists this layout under its Invisible Subwoofer technology, as the woofer is not visible from outside.
In the glass version the cabinet is a three-layer sandwich, which Audio Physic describes as stiffer, with fewer partial vibrations. Its terminal panel carries nextgen terminals with damping against micro-vibrations. Traverses at the base have M8 threads for the spikes or the optional VCF II M8 Magnetic plus feet.
Pairing
An amplifier stable into 4 ohms is required. The standard terminal is single-wire, and a bi-wiring or bi-amping terminal is available on request.
Alternatives
The Cardeas is the larger four-way floorstanding loudspeaker in the Audio Physic range.