The SCM50ASL Pro is the professional version of ATC's three-way active monitor, built in England and offered in the company's professional loudspeaker range. It shares its 'SL' bass driver, Super Dome mid-range and 'S-Spec' tweeter with the hi-fi SCM50ASL, but has its own cabinet proportions, rear amplifier pack and controls with continuous adjustment. ATC gives a six-year warranty.
Key specs that matter
Drive units are a 234 mm (9 in) 'SL' bass driver, a 75 mm (3 in) Super Dome mid driver and a 25 mm (1 in) dual-suspension tweeter. Frequency response is 70 Hz - 17 kHz (±2 dB), and cut-off frequencies are 38 Hz and 25 kHz (-6 dB, free-standing). Dispersion is ±80° horizontal and ±10° vertical. Crossover frequencies are 380 Hz and 3.5 kHz. Amplifier power is LF 200 W, MF 100 W and HF 50 W. Maximum continuous SPL is 112 dB at 1 m. Each monitor measures 716 x 351 x 400 mm (H x W x D), with the rear amplifier adding about 75 mm to the depth, and weighs 49 kg.
Engineering and use context
An on-board grounded source 350 W tri-amp pack is mounted on the rear of the cabinet, and ATC uses even-order, critically damped crossover filters.
Overload protection is by active FET momentary gain reduction in the amplifiers, with a power-on LED and a gain-reduction warning indicator on the monitor. The input is a balanced XLR on the rear (pin 2 hot) with an input impedance above 10 kohm and a sensitivity of 1 V. A trim control reduces the gain from 0 to -6 dB (1 V to 2 V), continuously variable. A second rear trimmer sets LF EQ from 0 to +6 dB at 40 Hz, also continuously variable.
Pairing
A balanced line-level source is required, such as a console, an audio interface or a preamplifier with XLR outputs. Each monitor needs its own mains connection. A rigid stand rated for 49 kg is required.
Alternatives
The SCM25A Pro is a smaller three-way active monitor in ATC's professional range.