Hifiverse

Bookshelf Speakers — Mission QX-1 MKII

Description, images, technical data and specifications

Mission QX-1 MKII
Image source - (c) Mission

The QX-1 MKII is the smaller of the two standmount loudspeakers in Mission's QX MKII Series, the mid-level range between the LX MKII and the flagship ZX Series. Alongside it the series has three floorstanding models, the QX-C MKII centre speaker and the QX-12SUB MKII subwoofer. It went on sale in September 2021 at GBP 299 per pair. Mission developed the MKII as an evolution of the QX line, through listening tests led by acoustic director Peter Comeau and with computer-aided optimisation, crossover modelling and laser interferometry.

Key specs that matter

It is a 2-way bass reflex design with a 135 mm long fiber composite cone and a 38 mm textile ring dome treble unit, crossed over at 2.4 kHz. Sensitivity is 87 dB (2.0 V/1 m), and peak SPL is 95 dB. Nominal impedance is 4 ohms (8 ohm compatible), with a minimum of 3.9 ohms. Frequency response is 55 Hz - 24 kHz (±3 dB), and bass extension is 48 Hz (-6 dB). Recommended amplifier power is 25 - 100 W. Cabinet volume is 8.1 litres. Each speaker measures 280 mm high on its plinth, 195 mm wide and 250 + 10 mm deep with terminals, and weighs 6.2 kg net. It is not magnetically shielded.

Engineering and use context

Mission's Inverted Driver Geometry (IDG) places the treble unit below the bass/midrange driver. The path length is equalised so the sound waves coincide at the listener's head height, and Mission states that this improves time alignment.

An improved acrylic fibre cone material is used in the DiaDrive System. Its seam-free curvilinear design has a conical support with an increased area of contact with the voice coil. In the ring dome, a woven textile is formed in a double ring arrangement, and the centre is fixed with a visible phase plug that prevents cancellation of high-frequency waves across the centre axis. Back pressure from the diaphragm is vented to a twin rear cavity to reduce resonance. According to Mission, this gives more consistent behaviour from 10 kHz to 20 kHz than a conventional dome.

Both drivers have serrated surrounds, revised after air-flow analysis and measurement, to scatter reflections and reduce airflow interference at the drivers and port. A colour co-ordinated aluminium top plate adds rigidity to the cabinet. Finishes are Black Oak, Matte White and Walnut Pearl. Mission manufactures the drive units in its own factory.

Pairing

An amplifier stable into 4 ohms is required. With a subwoofer, the AV processor speaker size is set to Small. The matching centre speaker is the QX-C MKII.

Alternatives

The QX-2 MKII is the larger standmount of the series, with a 165 mm long fiber composite cone in a 13.5 litre cabinet.

Specifications

  • Model name

    QX-1 MKII

  • Frequency Response low +/- 3dB (Hz)

    55

  • Frequency Response high +/- 3dB (Hz)

    24000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    25 - 100

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    28 x 19.5 x 26

  • Weight (kg)

    6.2

  • Official link

More components