Hifiverse

Bookshelf Speakers — Mission QX-2 MKII

Description, images, technical data and specifications

Mission QX-2 MKII
Image source - (c) Mission

Mission's QX-2 MKII is the larger standmount loudspeaker of the QX MKII Series and sits above the QX-1 MKII. QX MKII is the mid-level Mission range, between the LX MKII and the flagship ZX Series, and also includes three floorstanding models, the QX-C MKII centre speaker and the QX-12SUB MKII subwoofer. At its launch in September 2021 the UK price was GBP 399 per pair. Acoustic director Peter Comeau led the listening work for the MKII, with computer-aided optimisation, crossover modelling and laser interferometry as design tools.

Key specs that matter

A 165 mm long fiber composite cone and a 38 mm textile ring dome treble unit share a 2-way bass reflex enclosure, with the crossover at 2.2 kHz. Sensitivity is 88 dB (2.0 V/1 m) and peak SPL is 95 dB. Impedance is 4 ohms nominal (8 ohm compatible) and 3.6 ohms minimum. Frequency response is 44 Hz - 24 kHz (±3 dB), with bass extension to 38 Hz (-6 dB). Mission recommends 25 - 120 W of amplifier power. Cabinet volume is 13.5 litres. Height on the plinth is 320 mm, width 220 mm and depth 300 + 10 mm with terminals, for a net weight of 8.5 kg. No magnetic shielding is used.

Engineering and use context

In the Inverted Driver Geometry (IDG) format the treble unit is positioned below the bass/midrange driver. This equalises the path length so the sound waves coincide at the listener's head height, and Mission states that it improves time alignment.

Its DiaDrive System cone uses an improved acrylic fibre material, with a seam-free curvilinear design and a conical support that increases the area of contact with the voice coil. Mission's ring dome is a woven textile formed in a double ring arrangement, and the textile dome and multi-ring surround give stiffness over the maximum radiating area. A visible phase plug fixes the centre of the dome and prevents cancellation of high-frequency waves across the centre axis. Behind the diaphragm, back pressure is vented to a twin rear cavity to reduce resonance. Mission quotes better controlled behaviour from 10 kHz to 20 kHz than from conventional domes.

Serrated driver surrounds were revised by air-flow analysis and measurement to scatter reflections and reduce airflow interference at the drivers and port. Each cabinet carries a colour co-ordinated aluminium top plate for added rigidity, in Black Oak, Matte White or Walnut Pearl. Drive units are made in Mission's own factory.

Pairing

An amplifier stable into 4 ohms is required. With a subwoofer, the AV processor speaker size is set to Small. The matching subwoofer is the QX-12SUB MKII.

Alternatives

The QX-1 MKII is the smaller standmount of the series, with a 135 mm long fiber composite cone and an 8.1 litre cabinet.

Specifications

  • Model name

    QX-2 MKII

  • Frequency Response low +/- 3dB (Hz)

    44

  • Frequency Response high +/- 3dB (Hz)

    24000

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    25 - 120

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    32 x 22 x 31

  • Weight (kg)

    8.5

  • Official link

More components