The Elysian 1 is the two-way standmount loudspeaker of Wharfedale's flagship Elysian series. It followed the Elysian 4 floorstanding speaker and the Elysian 2 standmount as the latest and most compact model of the range. Acoustic design is credited to Peter Comeau, Wharfedale's Director of Acoustic Design. UK retail was GBP 3,499 per pair, and in the United States Wharfedale listed it at USD 4,995 per pair with matching stands. A revised Elysian 1R has since appeared in the Elysian R series.
Key specs that matter
Design is two-way bass reflex. A 180 mm coated glass fibre matrix cone bass unit is paired with a 27 x 90 mm AMT, and the crossover frequency is 2.6 kHz. Frequency response is 49 Hz - 22 kHz (±3 dB), with bass extension to 44 Hz (-6 dB). Sensitivity is 89 dB (2.83 V/1 m), and peak SPL is 108 dB. Nominal impedance is 4 ohms (compatible 8 ohms), min. 3.8 ohms. Recommended amplifier power is 25 - 175 W. Cabinet volume is 21.6 litres. Height on the plinth is 490 mm, width 263 mm and depth (285 + 30) mm with terminals, and net weight is 15 kg. Finishes are Piano Black, Piano Walnut and Piano White.
Engineering and use context
Wharfedale's AMT uses a large, pleated, lightweight diaphragm driven across its surface by rows of metallic strips immersed in a strong magnetic field. Its pleats contract and expand, squeezing the air between them. The Elysian version is larger and of higher specification than the AMT of the EVO4 series, with a PET diaphragm and an acoustically damped rear chamber.
Below it, the glass fibre matrix cone is terminated with a highly flexible rubber surround and driven by a low-distortion motor system. Low-frequency energy from the rear of the cone is vented through the SLPP (Slot-Loaded Profiled Port), a slot at the base of the speaker profiled to equalise the internal pressure to the room. Wharfedale states that this reduces the distortion typical of bass reflex systems.
Crossover slopes are computer-modelled on the acoustic response of each driver and matched to Linkwitz-Riley characteristics. Components include silicon-iron cored coils for the bass section, air core coils in the treble and low ESR polypropylene capacitors. Under the veneer, a sandwich of different woods called PROS (Panel Resonance Optimization System) reduces panel resonance. Handcrafted veneers carry true piano finish lacquers, hand-polished to six levels of depth.
Pairing
An amplifier stable into 4 ohms is required. The terminals allow bi-wiring, with link cables supplied. Its matching stands are the Elysian 1 Stands in high carbon steel.
Alternatives
The Elysian 2 is the larger three-way standmount model of the Elysian series.