The DIAMOND 12.2i is the largest of the three bookshelf speakers in Wharfedale's DIAMOND 12i series, above the 12.0i and the 12.1i, with the 12.3i and 12.4i floorstanding speakers higher in the line. It replaced the DIAMOND 12.2 in December 2025 at the same GBP 299 per pair. Wharfedale describes the series as a refinement of the DIAMOND 12 range rather than a new design. Finishes are All-Black semi-matte, Stone Grey, and Classic Walnut with a semi-matte black baffle.
Key specs that matter
This 2-way bass reflex speaker has a 150 mm advanced PP cone bass driver and a 25 mm textile dome tweeter, with a crossover frequency of 2.0 kHz. Frequency response is 50 Hz - 20 kHz (±3 dB), and bass extension reaches 43 Hz (-6 dB). Sensitivity is 88 dB (2.83 V/1 m), and peak SPL is 96 dB. Impedance is 8 ohms nominal with a 4.0 ohm minimum. Recommended amplifier power is 20 - 120 W. Cabinet volume is 11.8 litres. Dimensions are 335 x 200 x 313 mm (H x W x D, 285 mm plus 28 mm for the terminals), and net weight is 8.2 kg per speaker.
Engineering and use context
Changes for the i generation concern bass port tuning, airflow control and internal damping. Peter Comeau, Wharfedale's Director of Acoustic Design, led the port work with senior engineers Dan Bailey Ornellas and Oliver Davies. Over several months the team used laser interferometry, anechoic and in-room measurements, and computational fluid dynamics (CFD) to study airflow and pressure in the port.
Its mid/bass cone is carried over unchanged. Klarity, the cone material, is a blend of polypropylene and mica, and the cone has a low-damping surround and a ribbed profile. The motor uses a precise magnet system with an aluminium compensation ring, intended to reduce the effects of inductance changes as the voice coil moves, and the coil sits on a high-power epoxy/glass fibre bobbin. Its tweeter uses a woven polyester dome with a high-loss damping coating and a flat front plate with a minimal waveguide.
According to Wharfedale, the Linkwitz-Riley crossover uses air-core inductors, and the magnet structure of the mid/bass driver is modified for their resistance. Each cabinet has a multi-layered sandwich construction, with intelligent spot bracing that connects opposite walls through computer-modelled braces. Wharfedale gives a standard three-year warranty.
Pairing
An amplifier stable into 4 ohms is required. The matching centre speaker is the DIAMOND 12.Ci.
Alternatives
One step down in the 12i line, the DIAMOND 12.1i is a bookshelf speaker that uses a 130 mm bass driver in an 8.2-litre cabinet.