The AT-SB727 is the Sound Burger, a portable belt-drive record player from Audio-Technica. Its original version, the AT770, appeared in 1983 and was sold in the USA as Mister Disc. For the company's 60th anniversary in 2022, 7,000 red AT-SB2022 units were made and sold out at USD 199.99. The AT-SB727, announced on 5 January 2023 at GBP 199 or EUR 229, keeps the AT-SB2022 specification in yellow, black and white, and adds Bluetooth wireless transmission and USB charging to the original concept.
Key specs that matter
Drive is by belt from a DC servo motor, at 33-1/3 or 45 rpm. The platter is aluminium. Wow and flutter is below 0.25% (WTD) at 3 kHz, and signal-to-noise ratio is above 50 dB (DIN-B). The cartridge is a VM type stereo cartridge. Output is 150 mV nominal (1 kHz, 5 cm/s) with no phono output, and phono pre-amp gain is 36 dB nominal with RIAA equalisation. Bluetooth is version 5.2 with A2DP and AVRCP profiles, the SBC codec, 2.402 - 2.480 GHz, FHSS and a transmission band of 20 Hz - 20 kHz, with a range of up to 10 m in line of sight. Power is a DC 3.6 V lithium-ion battery (built-in), charged at 5 V, 0.5 A through a USB Type-C jack with 1.5 W consumption during charging. Charging time and playing time are approx. 12 hours each. Dimensions are 70 x 100 x 290 mm (H x W x D), weight is 900 g, and the operating temperature range is 5 - 40 °C.
Engineering and use context
A high-precision DC motor holds the speed, and the platter is a die-cast aluminium alloy part with a vibration-damping design. Audio-Technica uses a dynamic balance tonearm in which tracking force is applied by a spring. The stylus is the ATN3600LC, and the bonded elliptical ATN3600LE is offered as an upgrade.
The player has no built-in speaker. After the first pairing, pressing the power button reconnects it to the paired wireless speaker or headphones. A LINE output carries the signal by cable, and the player can also run while connected to the USB cable. No USB power adapter is included - Audio-Technica specifies one with 5 V output and at least 500 mA, or a computer USB port. Accessories are a 1.5 m USB cable (Type-A to Type-C), an audio cable and a 45 RPM adapter, packed in a box with illustrations from the advertising of the early model.
Pairing
Wireless playback requires a Bluetooth speaker or headphones with SBC. For a wired link the supplied audio cable connects to an amplifier or active speakers with RCA inputs. A phono stage is not required.
Alternatives
The AT-LP60XBT is a mains-powered automatic belt-drive turntable from Audio-Technica with Bluetooth and a switchable phono pre-amp.