Hifiverse

Plattenspieler - Audio-Technica AT-LP7X

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica AT-LP7X
Bildquelle - (c) Audio-Technica

The AT-LP7X is a fully manual belt-drive turntable from Audio-Technica, released in February 2026 as the successor to the AT-LP7. It keeps the J-shaped tonearm of its predecessor and changes the platter material from POM to high-density acrylic. A VM-type AT-VM95E BK cartridge in the body colour is pre-mounted on an AT-LT10 headshell, and a phono preamplifier with an MM (VM)/MC switch is built in. The finish is matte black.

Key specs that matter

Drive is a DC servo motor with belt transmission, at 33 1/3 or 45 rpm. Wow and flutter is below 0.1% (WTD, 3 kHz, JIS) and signal-to-noise ratio is above 60 dB. The tonearm is a static-balanced J-shaped type with an effective length of 247 mm, an overhang of 15 mm, a maximum tracking error angle below 2.0° and a tracking force range of 0.0 - 4.0 g. Phono preamplifier gain is 36 dB for MM and 56 dB for MC with RIAA equalisation, and output level is 4.0 mV at PHONO and 252 mV at LINE (1 kHz, 5 cm/s). The AT-VM95E BK has a 0.3 x 0.7 mil bonded elliptical stylus on an aluminium pipe cantilever, a recommended load of 47 kilohms and a tracking force of 1.8 - 2.2 g. Dimensions are 450 x 157 x 352 mm (W x H x D), weight is approx. 7.6 kg and power consumption is 5.5 W.

Engineering and use context

Its cabinet is 40 mm thick high-rigidity MDF, and the 20 mm acrylic platter has a high moment of inertia for stable rotation, and no platter mat is required. An optical sensor monitors the rotation speed continuously to hold the platter speed. The motor is floated on vibration-absorbing rubber, isolated from the cabinet. AC/DC conversion takes place in an external AC adapter, and spring-type height-adjustable feet suppress feedback and external vibration.

Audio-Technica based the arm on its traditional J-shaped designs of the 1960s and 1970s. It is mounted in a gimbal with independent vertical and horizontal axes, and VTA and anti-skate are adjustable. Usable cartridge and headshell mass is 14.0 - 20.0 g with the standard counterweight and 17.5 - 23.5 g with the supplied light sub-counterweight, and an optional heavy sub-counterweight extends it to 22.0 - 28.5 g. The VM95E body accepts the AT-VM95 series replacement styli, including elliptical, conical and MicroLinear types. Dust cover, EP adapter, a 1.4 m audio cable and gloves are included.

Pairing

With the built-in preamplifier on LINE, any line input is compatible. With PHONO selected, an external phono stage with an MM input is required for the supplied cartridge. The MC setting of the built-in preamplifier allows a moving-coil cartridge.

Alternatives

The AT-LP8X is an Audio-Technica direct-drive turntable with a static-balanced J-shaped tonearm and 33 1/3, 45 and 78 rpm.

Spezifikationen

  • Modellbezeichnung

    AT-LP7X

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    Static balanced J-shaped tonearm

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    AT-VM95E BK

  • Plattenteller

    20 mm (0.79") thick acrylic platter

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    < 0.1%

  • Signal-Rausch-Abstand (dB)

    > 60

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    450 × 352 × 157

  • Gewicht (kg)

    7.6

  • Offizieller Link