The AT-LP120XBT-USB is a direct-drive manual turntable from Audio-Technica, announced in August 2020 at a suggested price of USD 299 in black. It is based on the AT-LP120XUSB, with a Bluetooth transmitter added to the analogue and USB outputs of that model. Records play at 33 1/3, 45 and 78 rpm.
Key specs that matter
A DC servo motor drives the die-cast aluminium platter directly, with a starting torque above 1.0 kgf·cm and electronic braking. Wow and flutter is below 0.2% WRM (33 rpm), and S/N is above 50 dB. The static-balance S-shaped tonearm has an effective length of 230.5 mm, an overhang of 16 mm and a tracking error angle within 3.0°. Its tracking force range is 0-4.0 g, and it accepts cartridges of 11.8-17.8 g including the headshell. Output level is 4.0 mV (1 kHz, 5 cm/s) at PHONO and 240 mV at LINE, with 36 dB of gain and RIAA equalisation in the built-in phono stage. Bluetooth is version 5.2 with the A2DP profile, aptX Adaptive, aptX and SBC codecs, and a range of up to 10 m line of sight. Dimensions are 452 x 352 x 141.6 mm (W x D x H), and weight is 8 kg.
Engineering and use context
Supplied as standard is the AT-VM95E VM stereo cartridge, pre-mounted in an AT-HS6 headshell. It has a 0.3 x 0.7 mil bonded elliptical stylus on an aluminium pipe cantilever, a recommended load of 47 kOhm and a tracking force of 1.8-2.2 g (2.0 g standard). Any AT-VM95 Series stylus fits the same body, and the direct replacement is the AT-VMN95E.
Speed is held by a selectable quartz-controlled pitch lock, or varied by ±10% with the pitch slider. A strobe platter with speed indication shows the running speed. Audio-Technica uses a damping base structure against unwanted low-frequency feedback and gives the platter a vibration-damped design. Anti-skating, a hydraulic arm lift and an arm rest with clamp are provided, and a removable plug-in target light helps cueing in the dark.
Its USB output has a 16-bit A/D converter at 44.1 or 48 kHz, USB 1.1 compliant, for Windows 8.1 or later and macOS. No recording software is included, and Audio-Technica points to the free Audacity program. Power comes from a 12 V AC adapter. The box holds a dust cover with hinges, a felt mat, a counterweight, a 45 rpm adapter, the target light, a USB cable of about 1.9 m and an audio cable of about 1.0 m.
Pairing
At the LINE setting, any line-level amplifier input or powered speakers can be connected. At PHONO, an MM phono stage is required. Wireless headphones or speakers with Bluetooth A2DP pair directly.
Alternatives
The Audio-Technica AT-LP120XUSB is the same direct-drive design with analogue and USB outputs but without the Bluetooth transmitter.