Hifiverse

Plattenspieler - Audio-Technica AT-LP70XBT-BZ

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica AT-LP70XBT-BZ
Bildquelle - (c) Audio-Technica

The AT-LP70XBT-BZ-ACU is an Audio-Technica bundle that combines the AT-LP70XBT turntable in its black and bronze finish with an official limited-edition slipmat themed on A Complete Unknown, the James Mangold film about Bob Dylan. Audio-Technica's AT-LP70XBT is a fully automatic belt-drive turntable with Bluetooth, released on 7 August 2024. Its suggested US price was USD 249, and white and silver and black and silver versions are also listed.

Key specs that matter

A DC motor drives the aluminium die-cast platter by belt at 33 1/3 or 45 rpm. Wow and flutter is below 0.25% (WTD), and S/N ratio is above 55 dB. The J-shaped tonearm has an effective length of 220 mm, an overhang of 18 mm and a maximum tracking error angle below 2.0 degrees. Output level is 4.0 mV in PHONO mode and 252 mV in LINE mode (1 kHz, 5 cm/s). Gain of the built-in phono preamplifier is 36 dB with RIAA equalisation. Bluetooth 5.2 has a range of up to 10 m in line of sight, with the A2DP profile and aptX Adaptive, aptX and SBC codecs. Dimensions are 400 x 110 x 330 mm (W x H x D), weight is about 2.9 kg and power consumption is 1.6 W.

Engineering and use context

Its AT-VM95C is a dual moving magnet (VM) stereo cartridge integrated into the tonearm, and it cannot be removed. It has a 0.6 mil bonded conical stylus on an aluminium pipe cantilever and a recommended load impedance of 47 kohms. Replacement stylus is the AT-VMN95C, and the elliptical, nude elliptical, MicroLinear and Shibata styli of the AT-VM95 Series also fit, with the AT-VM95SP excluded.

Operation is fully automatic. A press of the start button begins playback, and at the end of the side the platter stops and the tonearm returns to its rest. Play can also be halted with the stop button. A clamp on the arm rest secures the stylus when the turntable is moved.

Audio-Technica uses a three-piece anti-resonance chassis to suppress unwanted resonance. Audio-Technica uses an external power supply to limit noise, an AC adapter with a 12 V DC, 0.5 A output. With aptX Adaptive the bit rate varies between 280 and 420 kbps, from 44.1 kHz/16-bit up to 48 kHz/24-bit. Included are a removable hinged dust cover, a felt mat, the platter with the drive belt, a 45 rpm adapter, a 1.0 m audio cable and the AC adapter with a 1.5 m lead. A replacement belt for the AT-LP70X family is sold separately.

Pairing

In LINE mode the turntable connects to active speakers or to a line input of an amplifier. In PHONO mode an amplifier with an MM phono input is required. Over Bluetooth it connects to wireless speakers or headphones, and aptX Adaptive requires a compatible receiver.

Alternatives

The Audio-Technica AT-LP70X is the same fully automatic belt-drive turntable with the AT-VM95C, without Bluetooth.

Spezifikationen

  • Modellbezeichnung

    AT-LP70XBT-BZ

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    AT-VM95C Integral Dual Moving Magnet

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link