Hifiverse

Plattenspieler - Audio-Technica AT-LP60XBT-USB

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica AT-LP60XBT-USB
Bildquelle - (c) Audio-Technica

The AT-LP60XBT-USB is a fully automatic belt-drive turntable from Audio-Technica with wireless, USB and analogue outputs. It adds a USB output to the Bluetooth transmitter of the AT-LP60XBT, so a computer can be connected for converting a record collection to digital files with recording software of the owner's choice. Audio-Technica announced it in March 2021 at an MSRP of USD 179, in a black finish.

Key specs that matter

The USB interface is USB 2.0 compliant, with 16-bit A/D and D/A conversion and a selectable sample rate of 44.1 kHz or 48 kHz. Bluetooth is version 5.0 with the Qualcomm aptX codec and a range of approx. 10 m. Drive is by belt from a DC servo-controlled motor at 33-1/3 or 45 rpm. Wow and flutter is below 0.25% (WTD) at 3 kHz, and signal-to-noise ratio is above 50 dB (DIN-B). A Dual Magnet cartridge is pre-installed, and its replacement stylus is the ATN3600L. Phono pre-amp gain is 36 dB with RIAA equalisation. Dimensions are 359.5 x 97.5 x 373.3 mm (W x H x D), and weight is 2.6 kg.

Engineering and use context

Its platter is an anti-resonance die-cast aluminium part with a felt mat. For the LP60X generation Audio-Technica redesigned the tonearm base and headshell. Power comes from an external 12 V AC adapter, with the transformer outside the plinth.

All three outputs are in one chassis. The RCA pair can stay connected to a stereo system while the USB cable goes to a computer and the Bluetooth link serves headphones or a portable speaker. A switch on the rear sets the RCA output to phono or line level, with the built-in preamplifier bypassed in PHONO position. Arm movement is automatic, and at the end of a side the tonearm lifts and returns to its rest. Included are RCA audio cables, a USB cable, a 45 rpm adapter and a removable dust cover.

Pairing

USB recording requires a computer with a free USB port. In LINE position the output connects to AV receivers, powered speakers and integrated amplifiers, and in PHONO position a phono input is required. Wireless playback requires a Bluetooth receiver, with aptX used where the receiver supports it.

Alternatives

The AT-LP60XBT has the same automatic mechanism and aptX Bluetooth transmitter without the USB output.

Spezifikationen

  • Modellbezeichnung

    AT-LP60XBT-USB

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Aluminum

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    >50

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    359.5 x 97.5 x 373.3

  • Gewicht (kg)

    2.6

  • Offizieller Link