The H-8000 DHT is a phono preamplifier from Allnic Audio of Korea in which every audio gain stage uses a direct-heated triode. It arrived in 2018 to replace the H-5000 DHT, and Allnic designed it to partner the L-8000 DHT line stage and the A-10000 DHT power amplifiers. The audio circuit and its supply occupy separate cases. After a pause, Allnic returned the model to production in 2024, and the American price stands at USD 44,000. Finishes are silver or black, and the warranty covers two years, or one year for the factory tubes.
Key specs that matter
Inputs comprise two MC and two MM pairs on RCA, with two screw terminals for ground wires, and outputs are one RCA and one XLR pair. At 1 kHz the stage provides 44 dB for MM and 74 dB for MC. MC loading goes up to 200 ohm, MM loading is 47 kOhm, with up to 85 kOhm available on request, and output impedance is a constant 300 ohm. RIAA accuracy is within 0.5 dB from 30 Hz to 20 kHz, distortion stays under 0.3% at 1 kHz and 1 V out, and noise is 80 dB down (CCIR). The MM input handles 200 mV at 1 kHz before clipping. Both cases measure 430 x 360 x 250 mm, the audio unit weighs 15 kg and the supply 16.7 kg, and consumption is 70 W on 110/120 V or 220 V mains.
Engineering and use context
All three gain stages operate in pure Class A, and the design uses no negative feedback. Two HL2K triodes handle the first stage, and four KR242 tubes, for which the only listed equivalent is the Telefunken RS242, run the second and third. Apart from the first stage, the signal passes between stages through transformers, so no coupling capacitors sit in that path. MC cartridges reach the circuit through step-up transformers on permalloy cores, and later units gained a first-stage transformer wound with pure silver wire. Equalisation is an LCR multi-curve network, and its variable settings serve records cut before the RIAA standard. The tube supply has its own complement of tubes - two 5U4G rectifiers, two 5654 error detectors and two 300B triodes working as voltage regulators. Allnic fits its patented Absorb GEL dampers on the tubes to reduce microphonic noise.
Pairing
Allnic matched this stage to its L-8000 DHT preamplifier, which shares the direct-heated triode concept, and the balanced XLR socket allows a long run to the line stage. The two MC and two MM inputs let one system host two tonearms, and the optional higher MM load widens the choice of moving-magnet cartridges. Since the supply case is as large as the audio unit, the rack needs two full shelves.
Alternatives
The Allnic H-10000 OTL/OCL is a two-chassis phono stage whose output works without transformers or capacitors and adds Decca and Columbia curves to RIAA.