The Allnic Audio H-7000V is a tube phono preamp split across two enclosures, designed by Kang Su Park in South Korea and announced at the end of 2017 as the replacement for the H-3000V. Like its predecessor it handles RIAA equalisation with an LCR network instead of resistors and capacitors alone, and the signal path is coupled by transformers from input to output. Allnic set its American price at USD 16,500, and buyers could order silver or black fascias.
Key specs that matter
Gain is 40 dB for moving magnet at 1 kHz and between 62 and 72 dB for moving coil, depending on the transformer setting. MM input impedance is 47 kohm, and output impedance is a constant 200 ohm. RIAA accuracy is within 0.3 dB from 30 Hz to 15 kHz and within 0.5 dB from 20 Hz to 20 kHz. Distortion stays below 0.3% at 1 kHz and 1 V output, while noise sits 85 dB below signal (CCIR). Signal leaves through balanced XLR sockets as well as single-ended RCA jacks. The main unit measures 430 x 350 x 173 mm and weighs 15.7 kg, while the power supply is 170 x 275 x 118 mm and 8.1 kg.
Engineering and use context
Two gain stages without negative feedback run in balanced Class A, and four E810F tubes operated in triode mode do the amplifying. The LCR equaliser combines two linear chokes with CR sections and, according to the designer, works at a constant 600 ohm impedance. The new multi-curve network offers four turnover frequencies (250, 400, 500 and 700 Hz) and four treble roll-off values (-16, -13.7, -11 and -5 dB), so records cut to pre-RIAA curves can be played with matching correction. Three input types exist - a head-amplifier input with electronic step-up, a step-up transformer input and a direct MM input that also serves an external step-up device. Each channel has its own Permalloy-core MC transformer with a knob for ratios of 13, 20, 26 and 40 times, which Allnic ties to cartridge loads of 29, 69, 117 and 278 ohm. Voltage regulation is entirely tube-based, using two 7233 and two 5654 tubes, and the separate supply rectifies with a 5U4GB. Mute and phase buttons share the fascia with two backlit meters that indicate tube health.
Pairing
The balanced output and low source impedance let the H-7000V drive long interconnects into a balanced line preamplifier, and the RCA pair covers single-ended preamps. The transformer ratios cover moving-coil cartridges from very low to medium output, and the direct input takes high-output moving-magnet designs. Collectors of older mono and stereo pressings get the most from the adjustable curves.
Alternatives
The Allnic Audio H-6500 is the less expensive tube phono stage of the brand, with 5842 triodes, two inputs of each cartridge type and a single RCA output pair.