Hifiverse

Phonovorstufen - Allnic Audio H-7000

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio H-7000
Bildquelle - (c) Allnic Audio

The Allnic Audio H-7000 is a two-chassis tube phono preamplifier from the South Korean company that Kang Su Park founded in 1990. It is the fixed-curve version of the design, applying standard RIAA equalisation only, while the H-7000V variant adds adjustable curves for 78 rpm and early mono discs. In the US it was first priced at USD 14,900, and a later base price of USD 19,800 rose to USD 21,300 with the optional silver step-up transformers.

Key specs that matter

The H-7000 has four single-ended RCA inputs - two for moving magnet and two for moving coil - chosen with a rotary selector on the front panel, plus a screw ground terminal. Moving magnet gain is 40 dB at 1 kHz into 47 kohm. The first MC input is rated at 60 dB, and the second offers 62, 66, 68 or 72 dB, with input impedance adjustable up to 470 ohm. Balanced XLR and unbalanced RCA outputs both run at a constant 200 ohm. RIAA deviation stays within 0.3 dB between 30 Hz and 15 kHz and within 0.5 dB across 20 Hz to 20 kHz. THD is under 0.3% at 1 kHz and 1 V out, and signal-to-noise is -85 dB (CCIR, 1 kHz). Before clipping, the MM input accepts 10 mV at 20 Hz, 50 mV at 100 Hz, 220 mV at 1 kHz and 690 mV at 10 kHz. The audio unit is 430 x 350 x 173 mm and 15.7 kg, the supply 170 x 275 x 118 mm and 8.1 kg.

Engineering and use context

Transformers couple the whole signal path, with step-up transformers at the MC inputs and output transformers after two active gain stages. These stages run in pure Class A, fully balanced and without negative feedback, and equalisation is handled by an LCR network. Four E810F (7788) pentodes, two per channel and strapped as triodes, provide the gain. Two 7233 and two 5654 tubes act as voltage regulators, and a 5U4G rectifier sits in the external supply, which has its own on/off switch and a 2 A, 250 V mains fuse. The Permalloy-core step-up transformers sit on the upper face of the milled aluminium chassis, which has no top cover and puts each tube inside a chimney. The MC impedance control is set against a chart in the manual that maps it to the transformer setting.

Pairing

Two inputs per cartridge type let a deck with a second tonearm, or a second turntable, remain wired in, in any mix of MC and MM. The balanced output and its low source impedance favour a balanced line preamplifier and longer runs of interconnect, while the RCA pair serves single-ended preamps. The transformer taps cover low-output moving coils, and the MM inputs are there for high-output moving-magnet cartridges.

Alternatives

The Allnic Audio H-8000 DHT is the Allnic phono preamplifier with a directly heated triode in every audio gain stage.

Spezifikationen

  • Modellbezeichnung

    H-7000

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    4

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    up to 470 (MC), 47 000 (MM)

  • Ausgangsimpedanz (Ω)

    200

  • Verstärkung (dB)

    40 (MM), 60 (MC1), 62 / 66 / 68 / 72 (MC2)

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    15 000

  • Klirrfaktor + Rauschen (%)

    <0.3

  • Abmessungen (mm)

    430 x 350 x 173 (Phonostage) + 170 x 275 x 118 (Power Supply)

  • Gewicht (kg)

    15.7 (Phonostage) + 8.1 (Power Supply)

  • Offizieller Link

Weitere Komponenten