Hifiverse

Endstufen Mono - Allnic Audio M-10000 Signature

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio M-10000 Signature
Bildquelle - (c) Allnic Audio

Allnic Audio unveiled the M-10000 Signature tube monoblock power amplifier in 2025. It replaces the earlier M-5000 Titan monoblock as a ground-up redesign, and Allnic calls it its true flagship power amplifier. Audio Mentors, the design and marketing company behind the brand, presents it as the power stage for the L-10000 Signature preamplifier, which shares the Signature name.

Key specs that matter

Each chassis drives one channel from eight KT170 beam tetrodes. Rated output reaches 500 W into 8 ohm, and the first 120 W or so come from pure class A operation, with class AB taking over above that level. Allnic quotes an input sensitivity of 2 V, an input impedance of 100 kohm for the XLR and RCA inputs alike and a voltage gain of 28 dB. Bandwidth is 20 Hz to 20 kHz within 3 dB, noise sits 80 dB below the signal, and distortion plus noise measures 0.11 percent at 1 kHz and 10 W with full global feedback. One monoblock weighs about 75 kg and occupies roughly 483 mm of width, 254 mm of height and 813 mm of depth. Packed for transport in its wooden crate and skid, each unit comes to around 100 kg.

Engineering and use context

Three tube stages make up the circuit. A single 5654W pentode forms the input stage, two 12A4 triodes provide the drive with high voltage gain, and the octet of KT170 tubes forms the output. Allnic winds its transformers on cores of Permalloy, a nickel-based alloy, and states that the power supply has near-zero voltage regulation, so the tubes keep their operating conditions as the load changes. Bias for every output tube is set from the front panel. A selector knob steps through positions V1 to V8, a meter behind the front window shows the level of the chosen tube, and a dedicated potentiometer per tube brings it back into line. Allnic adds that the same metering lets the owner keep an eye on the condition of each tube and replace one when needed. Compared with the M-5000 Titan it supersedes, the maker claims a large gain in both performance and reliability.

Pairing

Allnic positions the M-10000 Signature for driving large loudspeakers and filling large spaces. Within the brand, the intended partner is the L-10000 Signature preamplifier, and two chassis are required to build a stereo pair, so the floor space and rack planning should allow for a pair of deep, heavy units side by side.

Alternatives

The Allnic M-3000 mk3 is a smaller tube monoblock from the same maker with four KT170 tubes per chassis and a switch between pentode and triode operation.

Spezifikationen

  • Modellbezeichnung

    M-10000 Signature

  • Eingangsempfindlichkeit (mV)

    2000

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    500

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    28

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Signal-Rausch-Abstand (dB)

    80

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    0.11 at 1kHz at 10W

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link