Power amplifiers stereo — Audio Note P3 Tonmeister
Description, images, technical data and specifications
Audio Note P3 Tonmeister
Image source — © Audio Note
Specifications
Model name
P3 Tonmeister
Input sensitivity (mV)
450
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
100 000
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
8
Output power (4Ω) (W)
8
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
N/A
Frequency response high +/- 3dB (Hz)
N/A
Signal to Noise Ratio (dB)
N/A
Total Harmonic Distortion + Noise (0% global feedback) (%)
N/A
Total Harmonic Distortion + Noise (100% global feedback) (%)
N/A
Max power consumption (W)
N/A
Damping factor
N/A
Dimensions (mm)
220 x 460 x 530
Weight (kg)
27.5
Official link
More components
Power amplifiers stereo
Audio Note Ongaku Kensei
The Audio Note Ongaku runs on a pair of 211 lamps (6072 x 2, 5687 x 2, GZ34 x 4 tubes are also used), develops a power of 2 x 27 watts with 5% distortion in the frequency response from 8 to 21,000 Hz. The device weighs 34 kg.
Power amplifiers stereo
Audio Note Vindicator
Audio Note Vindicator Silver Signature Power Amplifier, ( 1x 2A3), Level 3, single-stroke 3.5 W Class A stereo power amplifier without feedback, power supply with tube rectifier and choke, copper foil signal capacitors Audio Note™, output transformers Audio Note™, Silver wire wiring Audio Note™, 1x 6SL7GT in the input stage, the output stage is based on a single 2A3 Sovtek with a 5R4GY cenotron.
Power amplifiers stereo
Audio Note Jinro Shochu
Audio Note Jinro Shochu power amplifier. (1x 211 ) Level 3, single-stroke ~20W Class A stereo power amplifier. For those who have been waiting for the unsurpassed performance level of our Audio Note Ongaku, but with the added flexibility of a symmetrical input, the wait is over.
Power amplifiers stereo
Audio Note Tomei Kensei
Audio Note Tomei Kensei power amplifier. (1x 211 ) Level 4, single-stroke ~20W Class A stereo power amplifier. Using the same scheme as Audio Note Ongaku Kensei and Jinro Shochu, Audio Note Tomei Kensei fills the gap between them. The use of copper in the primary and silver in the secondary windings of transformers makes its design unique and attractive.
Power amplifiers stereo
Audio Note P2 SE Signature
Audio power amplifier mark R2 GP2 (in 2x 6L6), Level 2, 18 Watts in Class A single-stroke stereo amplifier with 5881 4x and 2x 6SL7 lamps connected in parallel, audio mark 100 kOhm input volume control for independent, without pre-amplifier, operation with a single linear source. Operating in pure class A, the single-stroke tube amplifier preserves the musical signal as a whole and, in terms of performance, radically surpasses most modern analogues. The P2SE audio note represents the entire criterion of the Level 2 Audio Note (UK).
