TAD

The loudspeakers has a three-way design - a 2.5-cm tweeter with a beryllium diaphragm and a 9-cm midrange driver. The drivers are combined into a coaxial CST (Coherent Source Transuder) assembly. They are complemented by a 16-cm woofer with a multilayer composite MACC diffuser, which is made of woven aramid fibers and non-woven materials. The TAD ME1TX operates in the frequency range from 36 Hz to 62,000 Hz.

The TAD-R1TXLTD is a three—band system with a phase inverter. The Santa Maria-finished case, which highlights the almost three-dimensional elegance of the texture, features a pair of 25-cm bass drivers, a 16-cm midrange and a 3.5-cm high-frequency driver.

The TAD R1 T X cabinets were created in collaboration with the Japanese manufacturer of expensive furniture Tendo Mokko. The midrange and treble ranges (from 250 to 100,000 Hz) of the speakers are voiced by a 160 mm coaxial speaker CST (Coherent Source Transducer), the diaphragms of both drivers are made of beryllium. A pair of 250 mm TLCC sandwich diaphragm woofers works on the bass.

The three-way design includes the famous CST (Coherent Source Transducer) coaxial driver, in which both the midrange and high-frequency speakers are equipped with beryllium membranes. The latter provides the system with a frequency range up to 100 kHz.

The TAD E1-WN floorstanding speakers are equipped with proprietary CST coaxial drivers with a beryllium diaphragm tweeter and a midrange radiator with a magnesium alloy diffuser. The design of the E1-WN uses TAD ISO Drive technology, thanks to which the CST driver is mechanically decoupled from the speaker body to ensure accurate sound.

The TAD E1-WN floorstanding speakers are equipped with proprietary CST coaxial drivers with a beryllium diaphragm tweeter and a midrange radiator with a magnesium alloy diffuser. The design of the E1-WN uses TAD ISO Drive technology, thanks to which the CST driver is mechanically decoupled from the speaker body to ensure accurate sound.

The TAD Evolution One E1TX is an evolution of the successful ME1 "Micro Evolution One" model. Since the launch of the first Evolution series speaker system in 2011, TAD has consistently evolved to include new technologies such as CST (Coherent Source Transducer) drivers with beryllium and magnesium membranes or bidirectional ADS ports.

The TAD Evolution One E1TX is an evolution of the successful ME1 "Micro Evolution One" model. Since the launch of the first Evolution series speaker system in 2011, TAD has consistently evolved to include new technologies such as CST (Coherent Source Transducer) drivers with beryllium and magnesium membranes or bidirectional ADS ports.

The TAD CE1TX-K SILENT monitor body design combines various materials such as birch plywood spacers, medium-density FIBERBOARD panels and aluminum side panels. The proprietary ADS bass reflex bidirectional port system is designed to improve bass reproduction.

The TWO E2 uses the same 25mm beryllium dome tweeter as the legendary TAD E1 and TAD E1 models. It provides impeccable fidelity in the high-frequency range, which is an integral part of the sound signature of all acoustic systems that TAD has ever created.

The compact three-way speaker system TAD ME1 (Micro Evolution One) is equipped with a proprietary coaxial midrange/tweeter. The fact is that the main reason for unnatural, synthetic sound in the range most sensitive to our hearing is not so much distortion and non-linearity of the frequency response as phase (time) shifts between sound waves of different lengths. To minimize this effect, an emitter with characteristics close to a point sound source was created.

The TAD-M2500 TX power amplifier uses a BTL (bridge Load) design that connects two separate amplifiers in a balanced configuration for the left and right channels in a gain circuit from the input to the output stages.

The power of the TEN M700 is stated at 350 Watts per channel at a load of 8 ohms, the power supply is built around a huge transformer, it uses custom-made capacitors with a total capacity of 33,000 microfarads. The amplifier has a fully symmetrical design, with an input sensitivity of 1.5 V and an input impedance of 100 kOhm.

The M700S uses the latest cast aluminum chassis, which is characterized by high performance in terms of internal vibration dissipation. Such a chassis is capable of suppressing vibrations that occur at spurious frequencies. All components of the amplifier are optimally positioned and are not affected by vibrations caused by the sound pressure of the speakers.

The TAD-C700 preamp is equipped with a current feedback input stage with a minimum number of amplifying elements. A special output amplifier circuit provided for each of the two adjustable outputs eliminates interference from the connected equipment.

The TAD-D700 player is equipped with a patented Master Clock circuit, characterized by an ultra-high signal-to-noise ratio and allowing for an unprecedented level of fidelity in music playback from CDs and SACDs, as well as digital signals from external sources.

The TAD Labs TAD-M1000TX amplifier uses the BTL (Bridge Load) concept, which connects two separate amplifiers in a balanced configuration for the left and right channels in a gain circuit from the input to the output stages. TAD has also redesigned the ground point, which serves as a reference point for symmetry not only electrically, but also structurally.

The TAD Labs TAD-M1000TX amplifier uses the BTL (Bridge Load) concept, which connects two separate amplifiers in a balanced configuration for the left and right channels in a gain circuit from the input to the output stages. TAD has also redesigned the ground point, which serves as a reference point for symmetry not only electrically, but also structurally.

The robust metal chassis of the TAD C-1000 preamp, supported by proprietary spike supports, prevents external vibrations from affecting internal circuits. The power supply uses special toroidal transformers powering audio and control circuits, and custom-made TAD electrolytic capacitors in the power filter.

The TAD-D1000TX is new generation of SACD/CD players, made in a stylish design and preserving the concept, design and technique inherent in the TAD disc players that came before it.

This DAC can handle almost any type of audio file you like, from 32-bit/384 kHz PCM to DSD256.

The amplifier operates in Class D, which has a positive effect on energy efficiency: at maximum load, its power consumption does not exceed 250 watts.

Legendary Japanese brand TAD has unveiled its first ever integrated amplifier, the TAD-A1000. In the design of the TAD-A1000, the developers combined proven proprietary amplification technologies, including current feedback amplification and resistor ladder electronic volume control for preamplifiers, as well as an analog Class D amplification platform for power amplifiers, in a single device.

The TAD-E1AX speakers feature a three-way configuration. According to the manufacturer, compared to the previous version, the model has received a number of improvements to achieve superior audio performance. The updated coaxial CST (Coherent Source Transducer) driver features a tweeter with a beryllium diaphragm manufactured using proprietary vapor deposition technology. This tweeter was previously used in the TAD-ME1TX bookshelf model, released in early 2025. Furthermore, the CST driver features an improved midrange emitter with an anodized 9 cm diameter diaphragm and additional coating. The CST driver covers a wide frequency range from 420 Hz to 60 kHz.

The TAD-ME1TX-G Special Set is a limited edition speaker system, which is a specially designed version of the Evolution Series TAD—ME1TX, which entered the market during the first quarter of 2025. They are accompanied by matching speaker stands.

The architecture of the TAD-A1000D integrated amplifier is designed with a focus on achieving the maximum possible symmetry of the signal circuits.