Ranieri Audio Labs Varieta – a Preamplifier for Tube-Rolling
27.04.2025 07:47 | ~1 minute read
The Ranieri Audio Labs Varieta preamplifier has been released – the model uses directly heated triodes and allows for a wide range of tubes (300B, 2A3/6A3, 12A/201A, 26, 30, 31, 45, 50, 71A, 801A/10Y, 275A/252A, 245 and 842/VT52 will do). Simply ideal for those wishing to experiment with tube rolling.
The creators note that the Ranieri Audio Labs Varieta model will work perfectly with the entire spectrum of the tubes described above – instantly adjusting to the user’s chosen solution and offering different shades of sound depending on the type of tubes. The device uses low-noise circuitry and a two-stage solution with zero feedback and separate outputs with transformer coupling. A linear stabilized power supply ensures stable and stable operation of the preamplifier, and the auto-bias system eliminates the need for manual current adjustment.
Of other features of the Ranieri Audio Labs Varieta, it is worth noting the element base on Lundahl, Caddock, Alps and WIMA components and a chassis made of extruded aircraft aluminum 6061.
Specifications
This product is in the Hi-Fi and High End Electronics and Acoustics database
Preamplifiers — Ranieri Audio Labs Varieta
Model name
Varieta
Analog inputs (balanced)
N/A
Analog inputs (single-ended)
N/A
Analog outputs (balanced)
N/A
Analog outputs (single-ended)
N/A
Gain (dBu)
N/A
Input sensitivity (mV)
N/A
Output voltage (V)
N/A
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
N/A
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Maximum output level (balanced) (dBu)
N/A
Maximum output level (single-ended) (dBu)
N/A
Volume control range (dBu)
N/A
Frequency response low +/- 3dB (Hz)
N/A
Frequency response high +/- 3dB (Hz)
N/A
Signal to Noise Ratio (SNR, unweighted) (dB)
N/A
Total Harmonic Distortion + Noise (THD+N) (%)
N/A
Dimensions (mm)
N/A
Weight (kg)
N/A
Official link
More content
FiiO K15 – an Inexpensive DAC with a Headphone Amplifier
FiiO plans to release a new DAC with a headphone amplifier and a preamplifier FiiO K15. Detailed performance characteristics of the new product will be announced after the presentation at the CanJam exhibition in London - but it is already known that the model will go on sale in August 2025 for an affordable 599 euros. Of course, FiiO K15 supports Hi-Res up to PCM 32/768 and DSD512.
D&A Alpha PRO – Digital-to-Analog Converter with Zero-Jitter Clock Architecture
D&A (Digi & Aesth) has introduced a relatively inexpensive ($699) digital-to-analog converter with headphone amplifier D&A Alpha PRO. Alpha Pro was developed on the basis of the flagship ESS Technology ES9039MSPRO chip, it supports signals up to PCM 32/768, DSD512 and hardware decodes MQA.
Cyrus 40 PPA – the Latest Phonostage is Now Available
Cyrus Audio has officially unveiled the Cyrus 40 PPA phono preamplifier – the model has been previously demonstrated at exhibitions and is now available for sale at a suggested retail price of €2,499 or $2,899.
Cambridge Audio EVO 150 SE – Meet the Updated Amplifier
Cambridge Audio has released an improved version of its famous network integrated amplifier – this month the Cambridge Audio EVO 150 SE will go on sale. The device uses Class D amplification based on NCOREx “Tuned by Cambridge” modules and delivers 2 x 150 watts to 8 ohm speakers. The amplifier is equipped with a built-in digital-to-analog converter based on the advanced ESS Technology Sabre ES9018K2M chip.
Bluesound Powernode – Now GaN-Based
Bluesound has introduced a new generation of the Bluesound Powernode network integrated amplifier. The model now uses gallium nitride (GaN) amplification technology and is equipped with three amplification channels for the center speaker in home theater mode. At the same time, the Bluesound Powernode can operate in traditional stereo mode – then the power will be 2 x 100 watts, and when switching to three-channel mode – 80 watts.
