Hifiverse

High End Munich 2025 Systems - Estelon XB and MSB

Estelon XB floorstanders from Estonia run here from an all-MSB Technology electronics pair, the Cascade DAC feeding an S500 Stereo Amplifier directly. The room was shown at High End Munich 2025, the year Estelon marked its 15th anniversary. The idea behind the pairing is simple, a compact three-way speaker in a cast composite cabinet and a two-box digital chain whose converter also handles volume, so no separate preamplifier sits in the signal path.

Why these components work together

The XB is a bass reflex design rated at 87 dB at 2.83 V with a 6 ohm nominal impedance that falls to 2.9 ohm at 56 Hz, and Estelon asks for at least 30 W. Its 220 mm ceramic sandwich woofer, 158 mm ceramic mid-woofer and 25 mm inverted dome tweeter come from Accuton and cross at 90 Hz and 2.2 kHz. The S500 answers that dip with 500 W per channel into 8 ohm and 900 W into 4 ohm, from a zero-feedback design with a Class A matched impedance input stage, high-current output buffers and a 1.0 Farad power core. Three gain settings let it be matched to the DAC output level. The Cascade splits conversion into three chassis - a Digital Director for inputs and processing, an Analog Converter with eight Hybrid DAC MKII modules and a Femto 33 MKIII clock, and a Powerbase for the analog supplies, linked by the isolated optical Cascade-Link. Its relay-switched 75 ohm volume control with a fully balanced path drives the amplifier's XLR inputs without an extra stage, and two XLR and two RCA analog inputs remain for other sources.

How it sounds

With a large current reserve behind the 2.9 ohm point near 56 Hz, the floor-coupled woofer stays controlled, so bass lines keep their pitch rather than blooming. The curved baffle that places all drivers at equal distance from the listener holds voices steady in the centre on acoustic and vocal recordings.

Considering a similar setup

The amplifier must hold its output into under 3 ohm in the bass, so a smaller MSB amplifier such as the S202 is the realistic way down in budget. Using a DAC with a good built-in volume control saves a box, but only if it can drive the amplifier input directly.


3 components

  • Floorstanding loudspeakers

    XB

    by Estelon

    The 220 mm diameter woofer manufactured by the German company Accuton of this model has a special ultra-rigid sandwich diffuser with a ceramic coating. The design with a phase-invertor driver and a 38 mm titanium sound coil guarantees low energy storage and exceptional heat transfer.

  • DACs

    The Cascade DAC

    by Msb Technology

    The main feature of the device is its three—block design, which includes digital cascades with outputs, an analog path with outputs, and a power supply unit. All components are located in different buildings. Thus, their negative influence on each other is practically eliminated. Communication between the enclosures is provided using the Cascade Link optical interface.

  • Power amplifiers stereo

    The S500 Stereo Amplifier

    by Msb Technology

    The amplifier has a fully modular design. Radiators are made from solid pieces of aluminum, the thickness of the fins varies to smooth out mechanical resonances. Several grounding options for the circuit and housing allow you to avoid the occurrence of network loops and ground wire leads in a particular system.