Hifiverse

Linear Tube Audio Century Preamplifier – Flagship Tube Preamplifier with ZOTL Architecture

Linear Tube Audio Century Preamplifier – Flagship Tube Preamplifier with ZOTL Architecture
John Makovsky
John Makovsky

16.11.2026 12:48 | ~2 min read

American audio manufacturer Linear Tube Audio (LTA) has expanded its flagship Century series with the introduction of the Century Preamplifier at Capital Audiofest 2026 in the United States. The new model is the company's first fully balanced preamplifier to incorporate its proprietary Zero-Hysteresis Output Transformerless (ZOTL) technology, eliminating the need for conventional output transformers. Operating in Class A, the unit features direct-coupled amplification stages and a capacitor-less output stage. Designed primarily to complement the Century Monoblocks, the preamplifier provides a fully balanced amplification system.

Linear Tube Audio Century Preamplifier
Linear Tube Audio Century Preamplifier. Image source (c) Linear Tube Audio

The Century Preamplifier incorporates circuit innovations developed by engineer David Berning, previously implemented in the Aero+ DAC, the David Berning Company Pre One preamplifier, and the MicroZOTL Preamplifier Level 3. Each channel employs three tubes: one 12AT7 and two 6J5/12J5 triodes operating in a parallel single-ended configuration. The signal path uses no negative feedback, while a low-loss ceramic circuit board, non-magnetic materials, and extensive electromagnetic shielding are designed to minimise unwanted interference and signal degradation. The specified signal-to-noise ratio is 105dB, with a frequency response extending from below 1Hz to 120kHz at −3dB. Carefully selected new-old-stock (NOS) tubes are used in the output stage, offering an estimated service life of approximately 10,000 hours. Their operating conditions are continuously monitored and adjusted by an automatic biasing system to maintain stable performance.

Linear Tube Audio Century Preamplifier
Linear Tube Audio Century Preamplifier. Image source (c) Linear Tube Audio

Volume adjustment is handled by two independent, remotely controlled resistor-ladder attenuators, providing between 100 and 199 discrete steps. This arrangement ensures precise matching between the left and right channels, even at low listening levels. Gain is rated at 18dB through the balanced XLR outputs and 12dB via the single-ended RCA connections. The rear panel provides three stereo balanced XLR inputs and three single-ended RCA inputs, along with two stereo outputs of each type. Additional features include two 12V trigger outputs, individually configurable input settings, and a Home Theater Mode for integration into multichannel home cinema systems. Maximum output voltage reaches 14Vrms via XLR and 7Vrms through RCA.

Linear Tube Audio Century Preamplifier
Linear Tube Audio Century Preamplifier. Image source (c) Linear Tube Audio

The Linear Tube Audio Century Preamplifier is designed for high-end audio systems where minimal distortion, accurate reproduction of dynamic nuances, and preservation of spatial information are essential. The manufacturer specifies total harmonic distortion plus noise (THD+N) of 0.1% at 2Vrms through the balanced outputs and provides a five-year warranty. The preamplifier is available in two finishes: brushed silver and black. Sales are scheduled to begin in November 2026, with a suggested retail price of $18,000 in the US market.

Comments