Hifiverse

Phonostages - Pro-Ject Phono Box S2

Description, images, technical data and specifications

Pro-Ject Phono Box S2
Image source - (c) Pro-Ject

The Phono Box S2 is an MM/MC phono preamplifier from Pro-Ject Audio Systems, sold under the company's Best Buy label at an MSRP of EUR 159 including VAT. It succeeds the Phono Box S and uses the S2 style housing, an aluminium/metal sandwich construction that Pro-Ject specifies as protection against electromagnetic interference and vibration. The face plate is silver or black.

Key specs that matter

Input impedance is switchable between 10 ohms, 100 ohms, 1 kohm and 47 kohms, and input capacitance between 100, 200, 320 and 420 pF. Gain settings are 40 and 43 dB for MM and high-output MC cartridges, and 60 and 63 dB for low-output MC. A switchable subsonic filter gives -12 dB at 20 Hz. Signal-to-noise ratio is 85 dB, THD+N is 0.01% (MM) and 0.05% (MC), and RIAA accuracy is better than 0.4 dB (20 Hz - 20 kHz). Input and output are one pair of RCA connectors each. An outboard 18 V DC/500 mA supply powers the unit, consumption is 85 mA, and standby power is below 1 W. Dimensions are 103 x 36 x 104 mm (W x H x D), or 115 mm deep with sockets, and net weight is 570 g.

Engineering and use context

Its circuit uses a dual mono configuration with audiophile-grade amplification modules and polypropylene WIMA capacitors. Gain, capacitance and impedance are set with dip switches on the bottom of the unit, both channels equally and with the unit disconnected from the power supply and amplifier. Capacitance applies to MM and high-output MC cartridges and is irrelevant for low-output MC types, which use the 10 ohm, 100 ohm or 1 kohm positions. Pro-Ject gives example settings - 40 dB, 200 pF and 47 kohms for the Ortofon 2M Red, 43 dB, 420 pF and 47 kohms for the high-output X5-MC, and 60 dB with 10 ohms for the low-output Rondo Red.

A separate switch at the back turns the subsonic filter on and off. On the front panel, a button switches between operation and standby, with a blue LED showing that the unit is on. A screw terminal takes the earthing wire of the tonearm lead if hum appears.

Pairing

The output connects to a line input such as AUX, CD, Tuner or Tape, never to a phono input of the amplifier. Low-output MC cartridges require the 60 or 63 dB setting with one of the three low impedance values. Only the supplied power supply is to be used.

Alternatives

The Phono Box S2 Ultra keeps the same four gain levels but uses a circuit without operational amplifiers and polystyrene capacitors.

Specifications

  • Model name

    Phono Box S2

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    1

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    40 / 43 / 60 / 63

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    0.01

  • Dimensions (mm)

    103 x 36 x 115

  • Weight (kg)

    0.57

  • Official link