Hifiverse

Phonostages - Pro-Ject Tube Box E

Description, images, technical data and specifications

Pro-Ject Tube Box E
Image source - (c) Pro-Ject

The Tube Box E is a miniature tube phono preamplifier with a tube output stage from Pro-Ject Audio Systems, and it brings the Tube Box design into the E-line. It accepts MM and MC cartridges. MSRP was EUR 299 including VAT, and the US price was USD 350. The front panel comes in silver or black.

Key specs that matter

Tube complement is two ECC83 (12AX7A). Input gain is 40, 43, 50, 60 or 63 dB. Input impedance is 10 ohms, 100 ohms, 1 kohm or 2 kohms, or 47 kohms with input capacitance of 47, 147, 267, 367, 487 or 587 pF. Noise floor is 77 dB (A-weighted) at 40 dB gain and 65 dB (A-weighted) at 50 and 63 dB. THD is below 0.03% at 40 dB and below 0.07% at 50 and 63 dB. RIAA curve accuracy is ±0.5 dB (20 Hz - 20 kHz). A subsonic filter works at 20 Hz with 18 dB per octave. Input and line-level output are one pair of gold-plated RCA sockets each. An outboard 18 V/1000 mA DC power supply is used, with consumption of 470 mA DC and below 1 W in standby. Dimensions with sockets are 103 x 73 x 131 mm (W x H x D), and weight is 450 g without power supply.

Engineering and use context

Its circuit is fully discrete, with no operational amplifiers, and Pro-Ject states that maintenance, service and repair stay possible over a long product life-cycle. Its low-noise circuitry uses a FET input stage. RIAA equalisation is made in two parts, passive and active. Dual mono circuitry is used for channel separation, and polystyrene capacitors are used where possible. Inside are multiple internal power supplies and a well-filtered high-voltage anode supply.

Both ECC83 tubes are replaceable, and Pro-Ject offers them for tube rolling. Gain and the subsonic filter are switched with front-panel controls, while the loading options are set on the bottom of the unit. The enclosure is made entirely of metal to protect against electromagnetic interference and vibration. Its front panel and control elements are machined aluminium.

Pairing

A line-level input on the amplifier is required. Per Pro-Ject, the 10 ohm to 2 kohm settings are typical for low-output MC cartridges, and 47 kohms is typical for MM or high-output MC cartridges.

Alternatives

The Pro-Ject Tube Box S2 is the S2-line tube phono preamplifier with the same pair of ECC83 tubes.

Specifications

  • Model name

    Tube Box E

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    1

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    40 dB, 43 dB / 50 dB, 60 dB and 63 dB

  • Playback EQ curves accuracy (dB)

    0.5

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20000

  • Total Harmonic Distortion + Noise (%)

    0.07

  • Dimensions (mm)

    103 x 73 x 131

  • Weight (kg)

    0.45

  • Official link

Related content