The Tube Box S3 B is a balanced tube phono stage from Pro-Ject Audio Systems for MM and MC cartridges. It was announced in August 2025 together with the smaller Tube Box E. Pro-Ject makes it in Europe and offers it in silver or black. Its MSRP is EUR 599 including VAT, GBP 529 in the UK and USD 699 in the United States. In the name, B stands for balanced, with a 5-pin mini XLR input and XLR outputs.
Key specs that matter
Its tube complement is two ECC83 (12AX7). Gain is 40, 45, 60 or 65 dB, plus 6 dB at the XLR outputs. Input impedance is 10, 50, 100, 1k or 47k ohms, and input capacitance is 50, 150, 300 or 400 pF. Signal-to-noise ratio is 97 dBV (105 dBV A-weighted) for MM at 40 dB and 83 dBV (88 dBV A-weighted) for MC at 60 dB. THD is <0.005% MM and <0.01% MC at 1 kHz, and <0.1% MM and <0.03% MC across 20 Hz - 20 kHz. RIAA accuracy is <0.4 dB (20 Hz - 20 kHz). The subsonic filter operates at 20 Hz with 18 dB/octave. Inputs are one 5-pin mini XLR and one pair of RCA phono sockets, and line-level outputs are one pair of RCA and one pair of XLR. The DC supply is 18 V/1000 mA, consumption is 800 mA and less than 0.5 W in standby. Dimensions are 206 x 81 x 153 mm (164 mm with sockets), and weight is 1010 g without the power supply.
Engineering and use context
Pro-Ject uses a fully symmetrical and discrete gain stage in a dual mono layout. A balanced transmission carries a hot and a cold signal, and two individual amplifier sections are used for the two signal chains. According to Pro-Ject, the balanced gain stage subtracts noise added along the transmission. RIAA equalisation is semi-passive, and both ECC83 tubes are replaceable.
Unlike the S2 line, all settings are made on the front plate. Two turntables can be connected at once, a button selects the input, and the settings for each input are stored in memory. The lowest values of 10 ohms and 50 pF are intended for special cases such as cables with higher capacitance. Casework is steel and aluminium. The subsonic filter has its own push button and LED. Both outputs are active at the same time.
Pairing
The balanced input is ready for Pro-Ject's True Balanced Connection with a True Balanced phono cable and an MC cartridge. A turntable on the RCA input needs its ground wire on the screw terminal. The output goes to a line input, not to a phono input.
Alternatives
The Tube Box E is Pro-Ject's compact tube phono stage, announced at the same time.