Hifiverse

CD / SACD players and transports - Cyrus Audio CDt

Description, images, technical data and specifications

Cyrus Audio CDt
Image source - (c) Cyrus Audio

The CDt is a CD transport from Cyrus Audio of Huntingdon, Cambridgeshire, and the transport-only version of the Cyrus CDi CD player. Cyrus lists its production years as 2013 - 2024, and it was last offered at about EUR 1,495 before the CDt-XR replaced it. According to Cyrus, it uses many of the components of the flagship CD Xt Signature.

Key specs that matter

There is no onboard DAC. Digital outputs are one coaxial S/PDIF at 500 mV pk-pk into 75 ohms and one Toslink optical. Sample rate accuracy is 44.1 kHz ±50 ppm and clock jitter is below 80 ps. Discs are loaded through a front slot, and playable formats are CD Audio and CD-R. Power consumption is 5 W. Dimensions are 73 x 215 x 360 mm (H x W x D) and weight is 4.7 kg in the Cyrus product guide. An iR14 remote control, a mains cable and two phono leads for MC-BUS are included.

Engineering and use context

Servo Evolution is Cyrus's own disc-reading engine. Cyrus explains that a conventional laser mechanism makes small side-to-side movements to re-read mis-read data, and this servo noise raises the noise floor. Its aim is to extract the data from the disc as accurately as possible the first time, and Cyrus controls the whole electro-mechanical servo system in hardware and software to do this.

Without the DAC and its circuitry, the CDt is limited to data retrieval and a digital output. A re-clocking circuit with a close-tolerance crystal VCO is used before the outputs. The slot-loading drive is the latest generation of Cyrus's slot technology, a quiet, low-contact mechanism in place of a tray. Its front display shows the track number, the play mode and either the elapsed track time or the time remaining on the disc, and tracks can be stored in a program memory.

Cyrus builds its components in a die-cast aluminium chassis. The circuits are hung inside the inverted chassis, which forms an electrically shielded and mechanically vibration-free enclosure. On the rear panel, MC-BUS in and out sockets connect the CDt to a Cyrus amplifier for full system remote control.

Pairing

A DAC or an amplifier with a digital input is required, as the output is not compatible with analogue inputs. Cyrus names the Classic AMP and its preamplifiers as partners and suggests the 6 DAC, or the 8 DAC with the PSX-R2 power supply. The coaxial output connects to any S/PDIF input.

Alternatives

The Cyrus CDt-XR is the later CD transport with final re-clocking and a port for the PSU-XR power supply.

Specifications

  • Model name

    CDt

  • Transport

    Yes

  • Player

    N/A

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components