Hifiverse

CD / SACD players and transports - Cyrus Audio CDi-XR

Description, images, technical data and specifications

Cyrus Audio CDi-XR
Image source - (c) Cyrus Audio

The CDi-XR is a reference integrated CD player from Cyrus Audio of Britain, built on the CDi of the Classic series and housed in the same half-width chassis. In the Cyrus disc range it sits above the CDi and the CDt, and it was produced from 2021 to 2025. The UK price was GBP 2,195 and the US price USD 2,999.

Key specs that matter

Conversion uses the 32-bit second-generation QXR DAC. Cyrus states that its DAC design includes the highest specified Sabre DAC, paired with a high-speed analogue stage. Discs load through a front slot, and the player has the latest iteration of the Cyrus Servo Evolution technology. Outputs are two pairs of RCA analogue outputs (OUT1 and OUT2), one optical and one coaxial digital output. MC-BUS sockets, a PSU-XR connection, a servo upgrade port and a UI upgrade port complete the rear panel. Power consumption is 20 W, with less than 0.5 W in standby. Size is 75 x 215 x 355 mm (H x W x D), weight is 3.7 kg, and the enclosure is a die-cast chassis.

Engineering and use context

Read once and read accurately is the principle Cyrus applies to CD. Servo Evolution streams the data from the disc to the audio processing circuitry.

A CD player carries fast digital audio, sensitive analogue audio, high-current servo and system control signals together, and the CDi-XR power supply is completely segmented. Its digital control circuits run from a dedicated high-efficiency supply. All other sections are powered by an over-specified linear supply with a toroidal transformer, and nine individual stage regulators distribute that power within the player.

According to Cyrus, the PSU-XR external supply contains five independent regulated supplies in one box, and the CDi-XR uses four of them. A pair powers the analogue audio circuitry, one powers the motors, and one is reserved for the PLL digital master clock circuit to keep supply-related jitter to a minimum. Firmware V2.0 or later is required, and the connection is detected automatically.

Front panel controls are touch-sensitive. A tree-style menu holds display, time-out and system configuration options, and auto-standby after 20 minutes in pause or stop can be disabled there. Firmware is user-upgradable. The iR14 remote with backlit keypad and two phono leads for MC-BUS are supplied.

Pairing

The analogue outputs connect to a line input, never to a phono input. Either digital output connects to an external D/A converter, and Cyrus recommends the coaxial link. With a Cyrus amplifier MC-BUS gives full system remote control. The matching power supply upgrade is the PSU-XR.

Alternatives

The CDi is the earlier Cyrus integrated CD player from the Classic series, with a 32-bit QXR DAC and a PSX-R2 port.

Specifications

  • Model name

    CDi-XR

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components