The SuperSub X is a powered subwoofer from GoldenEar's SuperSub series and the ultra-compact model of the range. Like the larger SuperSub XXL, it uses a dual-plane, patented, inertially balanced driver array, here in a cabinet of about 32 cm per side.
Key specs that matter
Driver complement is two 203 mm long-throw, high-output bass drivers and two 267 x 241 mm quadratic planar back-wave-driven radiators, with a passive radiator surface area of 430.79 cm2. Frequency response is 26 Hz - 160 Hz (-6 dB on-axis, anechoic). The DSP-controlled amplifier is rated at 1500 W peak and 750 W RMS, measured into a 50 ohm load with a 55 Hz sine signal sustained for 5 seconds, and GoldenEar notes that this rating is not tested to the FTC standard. Power consumption is 1400 W, with separate 120 V and 240 V versions for 50 or 60 Hz mains. Dimensions are 356 x 335 x 325 mm (W x D x H, with feet), and weight is 18.2 kg.
Engineering and use context
Its two active drivers are horizontally opposed, while the two planar radiators are vertically opposed, so the drive units and the radiators work in two different planes. A Class D digital amplifier drives the active units.
On the input panel the LFE line-level input is unfiltered, with no low-pass, and direct-coupled. Right and left line-level inputs pass through a variable low-pass filter adjustable from 40 Hz to 150 Hz.
Pairing
The LFE input connects to the subwoofer output of an AV receiver or processor. Its right and left line-level inputs accept the pre-outs of a stereo preamplifier or integrated amplifier.
Alternatives
The SuperSub XXL is the larger model of the SuperSub series and uses the same driver array.