The ForceField 3 is an ultra-compact powered subwoofer from the American company GoldenEar Technology. GoldenEar describes it as the smallest and most affordable ForceField sub, and the ForceField series sits below the SuperSub models in the catalogue. It sold at USD 599 per unit in a matte black finish. GoldenEar later replaced it with the ForceField 30.
Key specs that matter
Driver complement is one 203 mm long-throw high-output bass driver and one 229 x 279 mm quadratic planar back-wave-driven radiator. Passive radiator surface area is 447.5 cm2. Frequency response is 27 Hz - 150 Hz (-6 dB on axis, anechoic). Amplifier output is 1,000 W peak and 500 W RMS. Dimensions with feet are 289 x 400 x 292 mm (W x D x H). Weight is 11.8 kg, or 14.1 kg shipped.
Engineering and use context
GoldenEar calls the amplifier a 1000-watt digital amp. Its power rating is measured into a 50-ohm load with a 55 Hz sinusoidal signal sustained for 5 seconds. GoldenEar notes that the figure is not tested to the FTC standard, which uses an 8-ohm load and a 1 kHz sinusoidal signal sustained for 5 minutes.
Speaker-level and line-level connection paths are both specified. A speaker-level low-pass filter has a 12 dB per octave slope and is continuously variable from 40 Hz to 150 Hz. Its speaker-level high-pass filter is 6 dB per octave at approximately 150 Hz. A separate low-level mono input is unfiltered, with no low-pass, and direct coupled.
Pairing
The unfiltered mono input matches the LFE output of an AV receiver or surround processor. A stereo amplifier without a subwoofer output connects at speaker level, and the main speakers then receive the high-passed signal from the subwoofer.
Alternatives
The GoldenEar ForceField 30 is the successor with the same 203 mm driver and radiator complement and a 26 Hz - 170 Hz response at -6 dB.