The ForceField 30 is an ultra-compact powered subwoofer from GoldenEar Technology. It replaced the ForceField 3 and was launched together with the larger ForceField 40 in July 2022, with availability from August at USD 899. The UK price was GBP 799. Within the GoldenEar catalogue the ForceField family sits below the SuperSub range.
Key specs that matter
Driver complement is one 203 mm long-throw high-output bass driver and one 229 x 279 mm quadratic planar back-wave-driven radiator, with a passive radiator surface area of 447.5 cm2. Frequency response is 26 Hz - 170 Hz (-6 dB on axis, anechoic), and the overall range quoted at launch is 18 Hz - 250 Hz. Amplifier output is 1,000 W peak and 500 W RMS, measured into a 50-ohm load with a 55 Hz sinusoidal signal sustained for 5 seconds and not tested to the FTC standard. Power consumption is 1,400 W, in 100-120 V and 220-240 V versions. Dimensions with feet are 289 x 406 x 322 mm (W x D x H). Weight is 14.3 kg, or 16.6 kg shipped.
Engineering and use context
GoldenEar lists several changes against the previous ForceField models. The cabinet has a curved top panel inspired by the GoldenEar BRX bookshelf model to minimise cabinet resonances. Its walls are thicker, and GoldenEar states that this keeps the cabinet from absorbing and smearing bass transient information. A perforated-metal grille is used, and the finish is satin black.
Its electronics platform is based on the SuperSub X and XXL. The ForceField digital amplifier is DSP-controlled, uses an Analog Devices DSP and has a MOSFET output stage. GoldenEar credits the MOSFET output stage and improved implementation with greater power-transfer efficiency.
Behind the grille, the bass driver has a computer-optimised ultra-stiff fibre cone and a high-gauss magnet assembly. Its passive radiator is downward-firing.
Each ForceField 30 has subwoofer Level and Low-Pass filter controls. The right and left line-level inputs pass through a low-pass filter with a 12 dB per octave slope, continuously variable from 40 Hz to 150 Hz. A separate mono LFE input is unfiltered, with no low-pass, and direct coupled.
Pairing
The LFE input matches the subwoofer output of an AV receiver or surround processor. A stereo preamplifier or integrated amplifier with line-level outputs connects to the right and left inputs. A line-level output on the amplifier is required.
Alternatives
The GoldenEar ForceField 40 moves up to a 254 mm long-throw driver, a 279 x 330 mm radiator and a 1,200 W ForceField digital amplifier.