The SubSeries BP8 is a powered subwoofer from PSB with two 8-inch drivers in a bipolar configuration and a sealed cabinet. Its driver design draws on elements of the Synchrony and Passif 50 loudspeakers. Finishes are Satin Black and Satin White.
Key specs that matter
Each of the two 203 mm (8 in.) drivers has a woven carbon fibre cone, a high-density filleted rubber surround, a 64 mm (2.5 in.) voice coil, a 1275 g (45 oz) magnet and a steel basket. Frequency response is 25 - 150 Hz (±3 dB, on axis), and LF cutoff is 20 Hz (-10 dB). Continuous power of the internal amplifier is 500 W, with an Analog Devices DSP and a Hypex amplifier. Crossover is variable from 50 to 150 Hz, with an LFE setting (350 Hz). Phase is adjustable from 0° to 180°. Dimensions are 330 x 355 x 330 mm (W x H x D), and net weight is 19.1 kg.
Engineering and use context
Both drivers are mounted in opposing alignment and work in phase. PSB states that this in-phase, opposing driver design eliminates vibrations within the cabinet. With a sealed cabinet the BP8 has no port or passive radiator and needs no port plugs. According to PSB, the pair has the air displacement of a single 11.5-inch woofer, and the cones have a doped paper backing.
Its amplifier is an nCore HybridDigital design. On the amplifier panel are the bass level, crossover and phase controls, and the phase dial moves in 22.5° increments, one per dial point. Integrated IsoAcoustics isolation feet decouple the subwoofer from room-generated vibrations.
Connections include gold-plated stereo RCA low-level inputs that also accept an LFE or subwoofer signal, high-level speaker inputs on binding posts and a 12 V trigger input. A USB power output (5 V, 1 A) powers a wireless subwoofer signal receiver. A three-way switch selects Auto, Trigger or On, and in Auto mode the subwoofer stays active for about 15 minutes without a signal before it goes to standby. Standby consumption is 0.5 W. The power supply accepts 100 - 240 V at 50/60 Hz, and North American and European power cords are supplied.
Pairing
The LFE output of an AV receiver or processor connects to the low-level input, with the crossover dial set to LFE. A stereo amplifier without a subwoofer output connects through the high-level inputs. An external wireless receiver is required for cable-free connection.
Alternatives
The SubSeries BP7 is the smaller sealed bipolar subwoofer in PSB's SubSeries, with two 6.5-inch drivers and a 350 W amplifier.