The SubSeries 350 is a sealed powered subwoofer with a 300 mm woofer from PSB Speakers, the Canadian company that Paul Barton founded in 1972 and that is now part of the Lenbrook group. It made its public debut in September 2018 at CEDIA in San Diego, alongside the smaller SubSeries 250, with a US launch price of USD 999. PSB places it above the SubSeries 250 and 150, and it inherits fit and finish from the SubSeries 450. PSB no longer sells it.
Key specs that matter
Design type is sealed. The woofer is a 300 mm polypropylene cone with a rubber surround, a 50 mm voice coil and a 1400 g magnet. A Class D discrete MOSFET amplifier is rated at 300 W continuous and 400 W dynamic peak. Frequency response is 25 - 150 Hz (on axis at 0°, ±3 dB), with the LF cutoff at 20 Hz (-10 dB). The low-pass crossover is variable from 50 to 350 Hz, with an LR4 filter. Input impedance is 9 kohms (low level) and 400 ohms (high level). Standby consumption is below 0.5 W. Net dimensions are 390 x 390 x 395 mm, and 400 x 405 x 410 mm (W x H x D) with grille, feet, knobs and terminals. Net weight is 19.5 kg, and shipping weight is 22.8 kg.
Engineering and use context
PSB describes the amplifier as a high-current, energy-efficient discrete MOSFET design. Its smart bass limiting circuitry prevents the woofer and the amplifier from being overdriven with any input level. Inside, peak limiting circuits hold the amplifier signal swing just below clipping, and compression circuitry reduces amplifier gain. Its cabinet is a compact sealed cube with soft edges in high gloss black, with an MDF front baffle and an ABS grille, and it stands on vibration-absorbing feet.
Rear-mounted controls on the amplifier panel cover volume, variable crossover, phase and standby. A front LED is red in standby and green in operation, and the auto on/standby circuit switches the subwoofer on when a signal is present. Gold-plated RCA low-level stereo inputs and outputs sit next to an LFE input and output and high-level inputs and outputs on gold-plated 5-way binding posts. A 12 dB/oct high-pass filter at 80 Hz is applied to the low-level outputs, and the high-level outputs pass the full range. Further items are a USB power output (5 V, 500 mA) for PSB's RT100 wireless accessory, selectable mains voltage and a detachable 2.4 m IEC C17 mains cord, supplied in North American and European versions.
Pairing
An AV receiver or processor connects to the LFE input. A stereo amplifier with speaker outputs only connects through the high-level inputs. The low-level outputs return a high-passed signal to the main amplifier.
Alternatives
The PSB SubSeries 250 is the smaller sealed model of the same series, with a 254 mm woofer and 200 W continuous power.