The SubSeries 250 is a 254 mm sealed powered subwoofer from PSB Speakers of Canada. PSB unveiled it on 5 September 2018 at the CEDIA show in San Diego, together with the SubSeries 350, at a launch price of USD 699. Its amplifier was developed in partnership with NAD Electronics, and fit and finish are carried over from the SubSeries 450. The cabinet is a compact sealed cube in high gloss black. PSB no longer sells it.
Key specs that matter
Design type is sealed. The woofer is a 254 mm polypropylene cone with a rubber surround, a 38 mm voice coil and a 990 g magnet. Amplifier power is 200 W continuous and 300 W dynamic peak, from a Class D discrete MOSFET design. Frequency response is 25 - 150 Hz (on axis at 0°, ±3 dB), and the LF cutoff is 20 Hz (-10 dB). The crossover is variable from 50 to 350 Hz with an LR4 low-pass filter. Input impedance is 9 kohms at low level and 400 ohms at high level. Standby power consumption is below 0.5 W. Net dimensions are 345 x 345 x 345 mm, or 345 x 375 x 365 mm (W x H x D) including grille, feet, knobs and terminals, and net weight is 16 kg.
Engineering and use context
According to PSB, the smart bass limiting circuitry prevents the woofer and the amplifier from being overdriven with any input level. In PSB subwoofers this circuitry combines peak limiting, which holds the amplifier signal swing just short of clipping, with compression that reduces amplifier gain. Its front baffle is MDF, and the grille is ABS. The cabinet stands on vibration-absorbing feet.
Volume, variable crossover, phase and a standby control switch are mounted on the amplifier panel at the rear. An LED shows red in standby and green when on, and the auto on/standby circuit switches the subwoofer on when a signal is present. Connections are gold-plated RCA low-level stereo inputs and outputs, LFE input and output, and high-level inputs and outputs on gold-plated 5-way binding posts. The low-level outputs are high-passed at 80 Hz (12 dB/oct), while the high-level outputs are full range. A USB power output (5 V, 500 mA) supports PSB's RT100 wireless accessory. Mains voltage is selectable, and a detachable 2.4 m IEC C17 power cord is supplied in both North American and European versions.
Pairing
The LFE input connects to the subwoofer or LFE output of an AV receiver or processor. A stereo amplifier without a subwoofer output connects through the high-level inputs. The low-level outputs allow the main amplifier to receive the high-passed signal.
Alternatives
The PSB SubSeries 350 is the larger sealed model of the same series, with a 300 mm woofer and 300 W continuous power.